TSB

screen printing => General Screen Printing => Topic started by: Palmetto7 on March 22, 2015, 10:38:11 PM

Title: What screen registration you suggest for Anatol Press?
Post by: Palmetto7 on March 22, 2015, 10:38:11 PM

I purchased a Anatol Horizon and am looking for suggestions for a Screen Registration System. I have a M&R system but it will not fit the Anatol. The Anatol requires smaller screens and has side clamps. I appreciate your input.

Thanks
David

Title: Re: What screen registration you suggest for Anatol Press?
Post by: 3Deep on March 22, 2015, 10:54:00 PM

Full size Horizon or mini size reason I ask is you say the screens are smaller, I use 20x24/20x28 on my Horizon Mini, I got some pics on here of my DIY reggie system on here.

darryl

type in the search.. Here is my reggie system pic's

Title: Re: What screen registration you suggest for Anatol Press?
Post by: Frog on March 22, 2015, 11:09:47 PM

http://www.theshirtboard.com/index.php/topic,12185.msg115018.html#msg115018 (http://www.theshirtboard.com/index.php/topic,12185.msg115018.html#msg115018)

Title: Re: What screen registration you suggest for Anatol Press?
Post by: Shanarchy on March 23, 2015, 12:43:55 AM

Newman pin registration will work with newman frames or shur-loc ez frames. Vastex has one which will work with side clamps, you may have to call them to go over the specifics of your frame size. Or search for a few of the nice DIY ones on here such as Daryl's and Alan's.