TSB

screen printing => Waterbase and Discharge => Topic started by: tonypep on March 23, 2015, 01:42:01 PM

Title: the old before and after
Post by: tonypep on March 23, 2015, 01:42:01 PM

colors are washy due to camera flash. Size of circle inhibited great blends but good enough. On a 6210 NL blend

Title: Re: the old before and after
Post by: tonypep on March 23, 2015, 01:43:42 PM

Big surprise forgot att!

Title: Re: the old before and after
Post by: ericheartsu on March 23, 2015, 01:46:01 PM

straight dc? or dcub?

We've found the NL6210 work great both ways!

Title: Re: the old before and after
Post by: blue moon on March 23, 2015, 01:56:55 PM

Quote from: ericheartsu on March 23, 2015, 01:46:01 PM

straight dc? or dcub?

We've found the NL6210 work great both ways!

that does not look like it has UB to me . . . If you check the solid color sections, they are very dark whereas the highlights are white from where the white ink printed.

pierre

Title: Re: the old before and after
Post by: tonypep on March 23, 2015, 02:00:29 PM

Straight DC btw the 6210 blacks not work well. C-

Title: Re: the old before and after
Post by: Sbrem on March 23, 2015, 05:34:06 PM

White highlight is an overprint, yes?

Steve

Title: Re: the old before and after
Post by: Underbase37 on March 24, 2015, 12:01:38 AM

Quote from: tonypep on March 23, 2015, 02:00:29 PM

Straight DC btw the 6210 blacks not work well. C-

This is where it falls on our chart as well

Murphy37

Title: Re: the old before and after
Post by: sqslabs on March 24, 2015, 09:33:27 AM

That's a pretty sweet DC print.

Title: Re: the old before and after
Post by: tonypep on March 24, 2015, 09:48:07 AM

Pretty basic really. Fixe the HT issue by upping to 305 mesh and crush screen.