TSB
screen printing => General Screen Printing => Topic started by: sportsshoppe on September 15, 2011, 04:07:42 PM
-
Ok so I ordered some film from Stuff for print. I decided to go with the non waterproof for the one timers I do. Well I am getting like it is too much ink on the film like the ink is smearing a little on the letters like it has little spikes coming off them. I called thier R&D and have not got a response yet. I was just wondering if anyone here may chime in.
Epson 3000
And it printed great on the waterproof film that I was already using.
I cleaned the head.
-
That's what I'm seeing with a similar non-waterproof film. The ink sits on top too much.
Prints perfect on the waterproof, but after exposure the film is useless.
I can't recall what I used to do with the non-wp film, but I used to get
perfect films that were completely archival quality.
-
'Waterproof' films are just so much better than (basically) OHP film. It's pennies difference to produce.
-
Ok so I ordered some film from Stuff for print. I decided to go with the non waterproof for the one timers I do. Well I am getting like it is too much ink on the film like the ink is smearing a little on the letters like it has little spikes coming off them. I called thier R&D and have not got a response yet. I was just wondering if anyone here may chime in.
Epson 3000
And it printed great on the waterproof film that I was already using.
I cleaned the head.
I have a roll of it in my 4000 right now. So far I have not had any issues and I left my ink density the same in the rip. Maybe you need to have the printer lay down less ink? As for it being a one time use mine are holding up perfectly after burning. What issues are you having that you are calling it a one time use?
-
Gawd, WP films suck. I am sorry, they just do. The reason is they are more forgiving..the ink spreads. If you have banding on NWP film, it's because you have a clogged head. WP film will wick some of the ink and fill those in. It also causes more dot gain. I am sorry, I hate WP film. NWP film with the right ink lasts just as long. I've tested both with a densitometer, so I know my results to be accurate. I get better films and better results on the NWP from spotcolorsupply.com
Also, WP filsm block too much UV for me. I like the crystal clear-ness of the NWP film.
Get the hybrid ink from inkjetcarts.com and be done with it...you will not find a better ink for films..period.
-
Inkworks I was referring to storing the film in X-Ray folders for later use, seem to stick together worse than WP film. My storage is in a non climate control area that may be why. May need to find out how to change density in rip
-
Switch your inks to the hybrid inks, they don't get sticky over time.
-
MK went to the website but not see a "hybrid" ink, can you give a little more imformation ?
-
Inkworks I was referring to storing the film in X-Ray folders for later use, seem to stick together worse than WP film. My storage is in a non climate control area that may be why. May need to find out how to change density in rip
Ok I have not had mine in there too long. J. Sheridon has used these for a while also maybe he will chime in. Jon sent me some in the mail and when I pulled them out they were not stuck together. Like mk162 I love the clarity of the film and lack of haze.
-
Probably an insultingly dumb suggestion but are you printing on the correct side?
-
I use non water proof film, this stuff is old stock and comes in rolls, the first yard for whatever reason pools the ink but after that the rest of roll prints just fine. may not help but try further in the roll? Unlike NWP film the image can be scratched. I love NWP film but it just too damn pricey even the "cheap" house brand stuff.
-
http://store.inkjetcarts.us/screen-printing-c481.aspx (http://store.inkjetcarts.us/screen-printing-c481.aspx)
Sorry, wrong site.
-
Probably an insultingly dumb suggestion but are you printing on the correct side?
Not insulting, but yes it was on the correct side.... Hoping the R&D will call today.
-
Probably an insultingly dumb suggestion but are you printing on the correct side?
Not insulting, but yes it was on the correct side.... Hoping the R&D will call today.
I've had the same problem with it and only going to WP film solved it. Let me know if you figure out what is the issue.
pierre
-
Hey SportsShoppe, it was great to talk to you the other day, sorry I was not of much help, as I explained the way FastRIP is setup it lays down way too much ink for this ink & film combination. The reason why you can use waterproof film is because it's coating is designed to absorb far more ink than non-waterproof. If anybody on this forum know how to change the ink density settings in FastRIP, that is the answer you and others (myself included) are looking for.
Stuff4Print sells a great deal of non-water proof film to many customer's, but all have RIP's with good density control, and all use a good quality UV blocking dyebased black ink.
If there is anything more I can do to help you, please do not hesitate to call me back.
Regards, Liam :-)
-
Talked to R&D and the problem is I am using FastRip 9.0 which came with my Epson 3000 and he said there is no setting to adjust the ink deposit and it is putting down too much on the NWP film. Sooooooo anyone need a 13 X 100 roll of NWP film at a discount?
-
Talked to R&D and the problem is I am using FastRip 9.0 which came with my Epson 3000 and he said there is no setting to adjust the ink deposit and it is putting down too much on the NWP film. Sooooooo anyone need a 13 X 100 roll of NWP film at a discount?
Yes Sportsshoppe we do ... all of our products are sold Satisfaction Guaranteed, even though there is nothing wrong with the film, we will replace it with waterproof film for you. Please call us toll free 888 857 8833 and discuss the replacement roll with Anna (she is very helpfull)
-
Wow, I thought that one of the selling points of FastRip was that one could adjust the ink volume.
In that same vein, if it is set a certain level (too high) is this indicative of the chemistry of NWP film drastically changing in the last few years? Perhaps the coating is not as absorbent as it used to be.
I remember when FastRip and a 3000 was the hot set-up.
-
Wow.. ppl still use Fastrip.. ???
GET ACCURIP!!
It allows ink control and has drivers for just about any worthwile Epson printer.. including the 3000 8)
I use the Stuff 4 Print Windsor film in my r1800 with dye inks and it creates incredible films.
I'm working on a 55 line job right now, 3 color all with tones from 5 to 70's and the dots are perfect.
1440x1440 res with 3 drops.
-
Probably an insultingly dumb suggestion but are you printing on the correct side?
Not insulting, but yes it was on the correct side.... Hoping the R&D will call today.
I can't say enough nice things about Ross at inkjetcarts.us The guys is a customer support BEAST!
EVERYTIME I email him, night, day, weekend, apocalypse... it doesn't matter... he responds in no time!
-
Wow.. ppl still use Fastrip.. ???
GET ACCURIP!!
It allows ink control and has drivers for just about any worthwile Epson printer.. including the 3000 8)
I use the Stuff 4 Print Windsor film in my r1800 with dye inks and it creates incredible films.
I'm working on a 55 line job right now, 3 color all with tones from 5 to 70's and the dots are perfect.
1440x1440 res with 3 drops.
Well it is like this.... I have not had a problem with fastrip and it came with the printer in a package deal soooooo why fix something when it is not broken? I see no need in spending extra money on something that has been working for years. But if it does break and I have to get another Rip program then your right I am going Accurip. And Stuff4Print it is not your fault. I decided to go with the NWP film and do not hold you responsible at all, but if you will work with me that would be Great! but again I made the decision.
-
We will definitely work with you!!! I will call you today.