TSB
screen printing => Equipment => Topic started by: LoneWolf2 on April 20, 2015, 10:13:41 AM
-
Need to buy some new squeegee blades for a batch of new holders I got in this week but have no idea what to go with. What kind of triple duros are all of yall using and why?
-
Use the search feature. Though not the best, it turned up a few threads covering this.
Here's one I found using "search" in the equipment section. (sometimes where you search seems to matter)
http://www.theshirtboard.com/index.php/topic,7484.msg76398.html#msg76398 (http://www.theshirtboard.com/index.php/topic,7484.msg76398.html#msg76398)
btw, as you can see, I also moved this thread to Equipment
-
Serilor call Nazdar
-
I have Pleiger for $1.35 per inch.
-
Need to buy some new squeegee blades for a batch of new holders I got in this week but have no idea what to go with. What kind of triple duros are all of yall using and why?
Go to store.mrprint .com and punch in squeegee rubber. Its M&R brand made by Fimor.
-
Serilor TXS-3 55/90/55 for plastisol white UBs, HSA, WB, DC.
70/90/70 for all else, I think Saati 'made' our last couple rolls, but probably they are rebranding another's?
-
Serilor TXS-3 55/90/55 for plastisol white UBs, HSA, WB, DC.
70/90/70 for all else, I think Saati 'made' our last couple rolls, but probably they are rebranding another's?
Completely agreed.
55/90/55's are great for putting down a good layer of white - but the 90 still allows you to hold more detail than a 60 or 65 single durometer.
70/90/70's are great for all else.
-
Call multicraft (info on multicraftink.com) and order the red white and blue. 65/95/75. You'll thank me later.
Pierre
P.s. Oh, yeah, and the 55/95/55 is the way to go for the whites. Tech support sps has the best pricing I've found. They have a banner on the top.
-
Need to buy some new squeegee blades for a batch of new holders I got in this week but have no idea what to go with. What kind of triple duros are all of yall using and why?
Go to store.mrprint .com and punch in squeegee rubber. Its M&R brand made by Fimor.
Rich all I see are squeegee with handle no just blade. Did I miss it?
Shane
-
Need to buy some new squeegee blades for a batch of new holders I got in this week but have no idea what to go with. What kind of triple duros are all of yall using and why?
Go to store.mrprint .com and punch in squeegee rubber. Its M&R brand made by Fimor.
Rich all I see are squeegee with handle no just blade. Did I miss it?
Shane
its under squeegee blade
-
Call multicraft (info on multicraftink.com) and order the red white and blue. 65/95/75. You'll thank me later.
Pierre
P.s. Oh, yeah, and the 55/95/55 is the way to go for the whites. Tech support sps has the best pricing I've found. They have a banner on the top.
Sell me on the triple multicraft squeegee. What's so good about it?
-
I second the Multicraft red/white/blue and I have thanked Pierre. It doesn't bend, stays sharp.
-
I second the Multicraft red/white/blue and I have thanked Pierre. It doesn't bend, stays sharp.
Third.. Since we've started using them about a month ago they have become our go-to squeegees for most jobs and having the ability to flip it around if needed to achieve more/less ink deposit is also big plus, especially on sim process jobs.
We also use Serilor 55/95/55's for laying down lots of white and 75/95/95's for top colors/high detail printing.
-
Rich, under screen print supplies? I must be blind. I dont see it, can you post link.
Shane
-
Rich, under screen print supplies? I must be blind. I dont see it, can you post link.
Shane
Go to store.mrprint.com. In upper right corner use search box and punch in squeegee blade.
-
That site could use some work. My radicure has ZERO parts for it when I click on it.
-
That site could use some work. My radicure has ZERO parts for it when I click on it.
have you ever registered your Radicure on the site? If so please send me your serial number and I will look into.
-
That site could use some work. My radicure has ZERO parts for it when I click on it.
have you ever registered your Radicure on the site? If so please send me your serial number and I will look into.
Here is where we left off last time.
http://www.theshirtboard.com/index.php/topic,12980.msg124637.html#msg124637 (http://www.theshirtboard.com/index.php/topic,12980.msg124637.html#msg124637)
-
(http://media.giphy.com/media/5x89XRx3sBZFC/giphy.gif)
-
([url]http://media.giphy.com/media/5x89XRx3sBZFC/giphy.gif[/url])
Your Radicure is a little older than when we started tying the serial number on the store to your Radicure. You must use a generic bill to see parts. Our parts manager will try and get in touch with you .
-
Hello,
Please contact me 847 410 3517 and I will try to help you with your issue.
Kris Bochenek
M&R Parts Department.
847 410 3517.
-
Hello,
I had my IT log in as you and under that dryer's serial number we do show catalog. Please see the screen shot.
At any rate. We are here to assist you. If you need any help, please feel free to send me an email at kris.bochenek@mrprint.com or to parts@mrprint.com
-
Alright! It's fixed now.
If you look on the previous thread I mentioned above, you will see the screen shot where I didn't have the catalog option like I do now.
Now, hopefully my dryer will never break and I will never need this... good to know it's there if I need it. It was kind of sketchy ordering last time kind of blind.
-
Alright! It's fixed now.
If you look on the previous thread I mentioned above, you will see the screen shot where I didn't have the catalog option like I do now.
Now, hopefully my dryer will never break and I will never need this... good to know it's there if I need it. It was kind of sketchy ordering last time kind of blind.
Hi there,
If you ever need help with parts and are not sure what the correct part number might be, give us a shot at parts@mrprint.com with a picture and your serial number and we will point you in the right direction.
Regards,
-
I had tried that as well... never got a response.