TSB

screen printing => General Screen Printing => Topic started by: kingscreen on April 20, 2015, 07:55:42 PM

Title: How would you do it? (New Shop Layout)
Post by: kingscreen on April 20, 2015, 07:55:42 PM

We are moving into a large building soon and are starting to plan the new layout. 
Here's a PSD file 1cm = 1ft. with the presses and dryers as moveable layers.

How would you lay it out?

https://dl.dropboxusercontent.com/u/61484495/SHOP-LAYOUT.psd

Title: Re: How would you do it? (New Shop Layout)
Post by: willy35 on April 21, 2015, 02:44:57 AM

I looked at the PSD, indeed, very large building.

I would connect to dryer2 with sidewider 66 and future sabre 8/10 and Dryer 1 with the remaining press
1 auto per dryer.

Title: Re: How would you do it? (New Shop Layout)
Post by: willy35 on April 21, 2015, 02:47:02 AM

Last I prefer to use M&R shop layout
http://forums.mrprint.com/showthread.php?366-Download-Free-M-amp-R-Shop-Floor-Layout-Software (http://forums.mrprint.com/showthread.php?366-Download-Free-M-amp-R-Shop-Floor-Layout-Software)

or illustrator, to simulate the space require around the press and because it is more handy to move or make change.