TSB

Embroidery => General Embroidery => Topic started by: BlueBelleLarkhall on April 24, 2015, 05:25:18 PM

Title: Glove Cylinder Brother BAS-416a
Post by: BlueBelleLarkhall on April 24, 2015, 05:25:18 PM

Very New to embroidery and one of my main lines is Gloves which I have been printing but wish to offer embroidered gloves, can't seem to find a Glove Cylinder for my machine,

Any advice would be much appreciated


Sent from my iPhone using Tapatalk

Title: Re: Glove Cylinder Brother BAS-416a
Post by: Audifox on May 01, 2015, 02:31:15 PM

 With your machine being an older machine, I don't think you will find one. That frame works off of the quick change system that is on the Tajimas. If I remember correctly, your  brother machine does not have 270 cap capabilites.

 My suggestion would be to try something like the shoe clamps.
http://www.hooptechproducts.com/t/ShoeClamps (http://www.hooptechproducts.com/t/ShoeClamps)

Or a new machine..... ::)

Title: Re: Glove Cylinder Brother BAS-416a
Post by: BlueBelleLarkhall on May 03, 2015, 04:36:52 PM

Thanks for your reply tested a small hoop on a glove and it worked temporary problem solved but yes may need to upgrade


Sent from my iPhone using Tapatalk
Blue Belle Media Ltd
Larkhall, Scotland,
????????GB????????