TSB
screen printing => General Screen Printing => Topic started by: MrBreeze on September 16, 2011, 06:09:12 PM
-
Looking for someone that has experience with the Vastex Digit Numbering System. Already have a Brown Numbering press and an Inline Numbering press plus still using a fair amount of stencils. Any reviews negative or positive would be very helpful. Thanks to the masses.
-
We have had ours for about a year and very happy with it. I have tried the inline before I purchased the Digit system, never the brown.
Likes: easy to use, fast, I can use it on any rear clamp press, we can burn our screens in house, out of the way when not in use.
Dislikes: Need to add some bungee cords to the heads because its heavy, need to watch your fingers when setting up or taking down, can be a pain to register.
I did modify the screens by adding off contact strips between the numbers, if you were not super careful you would get ghost images. I believe Vastex has made a mod to the system since I got mine to avoid this issue. We do a lot of team stuff 1-12 or 15 and found it easier to do all the #1 for all the teams first then #11 then #12 etc instead of running 1,2,3,4,5,6 etc.
-
Do you have a 1 color set or a 2 color set?
-
Two color and two color outline. I also purchased a complete set of films so I can burn as needed.
-
I would have to produce my own films and shoot my own screens so that all my numbers; brown, inline, stencil and vastex were all the same. We have made all of our own films for the number printers we have now so it won't be a problem to remain consistent.
-
I was interested in purchasing a vaster numbering system, I was wondering I can get an e-mail with the correct set up to burn my own screens for the numbering system?