TSB

screen printing => Ink and Chemicals => Topic started by: noortrd on July 03, 2015, 05:46:29 AM

Title: Best polywhite
Post by: noortrd on July 03, 2015, 05:46:29 AM

Any body tell me best and polywhite is the market.

Title: Re: Best polywhite
Post by: Printficient on July 03, 2015, 08:11:16 AM

A little biased but Xenon Mustang White

Title: Re: Best polywhite
Post by: kingscreen on July 03, 2015, 08:13:46 AM

We use Wilflex Top Score and have been very happy with it.

Title: Re: Best polywhite
Post by: ericheartsu on July 03, 2015, 08:44:14 AM

we really like the ICC low cure white

Title: Re: Best polywhite
Post by: Maff on July 03, 2015, 09:00:17 AM

We've been using International Coatings 7113 performance pro white for a while now and have been very happy with it. Low cure, stretches well and easy to print manually.

Title: Re: Best polywhite
Post by: noortrd on July 03, 2015, 11:38:25 AM

Also best for migration control.

Title: Re: Best polywhite
Post by: whitewater on July 03, 2015, 11:40:29 AM

we changed from UNion poly to Willflex top score...Holy crap what a difference...that UNion poly white turned to crap when they changed it.

Title: Re: Best polywhite
Post by: ScreenFoo on July 03, 2015, 11:44:51 AM

I actually really like the Union 1070 slightly modified--but just like any other ink, not so good if it's old or heat damaged.

Title: Re: Best polywhite
Post by: DannyGruninger on July 03, 2015, 02:18:07 PM

I've only run through a couple gallons but the bravo flex from one stroke was really nice.....$$$$ but out of all the poly whites I've tested this is at or near the top. I just haven't ran enough of it yet to really say 100%

Title: Re: Best polywhite
Post by: screenprintguy on July 03, 2015, 04:40:13 PM

Our go to is Rutland Super Poly white, but I do have to say, we tried some of the One Stroke Versamax White. It's an all encompassing white for anything, vinyl, nylon, 100% you name it. You need no additives. It's already stretch ready, bleed resistant, and bonds to anything. It's pricey, but it's really nice, even underbasing. We did a ton of compression shirts and nylon/stretchy type athletic bags for a private line and it was nice to work with.

Title: Re: Best polywhite
Post by: JBLUE on July 03, 2015, 06:12:13 PM

For most of our poly stuff we use Rutland Super Poly. Never run into issues and it holds up real well. Takes a couple of dozen shirts on the auto to get warmed up but thats its only negative. We are Wilflex for all our other plastisol and it plays well with those as well.

Title: Re: Best polywhite
Post by: Sbrem on July 17, 2015, 05:04:41 PM

Rutland Super Poly is our go to here...

Steve

Title: Re: Best polywhite
Post by: scott316 on July 17, 2015, 09:52:13 PM

Quote from: ericheartsu on July 03, 2015, 08:44:14 AM

we really like the ICC low cure white

Are you using performance pro ?

Title: Re: Best polywhite
Post by: dirkdiggler on July 17, 2015, 10:22:18 PM

Wilflex Performance white here!

Title: Re: Best polywhite
Post by: Rockers on July 18, 2015, 07:50:00 AM

I`d say as well Wilflex Performance White is the bee`s knees.

Title: Re: Best polywhite
Post by: jvanick on July 18, 2015, 09:47:29 AM

Wilflex Performance white here as well...

we like it so much for stuff like this that we even have the performance base for our mixing system.

for 50/50's these days we've been starting to run One Stroke Hybrid white.. REALLY like that white and it's not too costly either.