TSB

screen printing => Equipment => Topic started by: farmboygraphics on July 29, 2015, 05:36:20 PM

Title: Print run on Diamondback
Post by: farmboygraphics on July 29, 2015, 05:36:20 PM

When running a large pfp job (print head 1, flash on 2 and print head 6) I'm at the mercy of the flash for how fast I can print. I've been using the Revolver mode to trick it into keeping the flash parked over the platen so I don't have the wait time of the flash shuttling back and forth. Is there a better way to do this?

Title: Re: Print run on Diamondback
Post by: 244 on July 29, 2015, 06:14:46 PM

Quote from: farmboygraphics on July 29, 2015, 05:36:20 PM

When running a large pfp job (print head 1, flash on 2 and print head 6) I'm at the mercy of the flash for how fast I can print. I've been using the Revolver mode to trick it into keeping the flash parked over the platen so I don't have the wait time of the flash shuttling back and forth. Is there a better way to do this?

You do not have to do this. Contact our service department ,have your serial number ready and they will tell you how to put the head in flash mode.

Title: Re: Print run on Diamondback
Post by: farmboygraphics on July 30, 2015, 08:43:56 AM

Rich,

I found it in the manual. Not sure how I  missed it.