TSB

screen printing => Equipment => Topic started by: DCSP John on September 02, 2015, 11:35:02 AM

Title: Exhaust on 60" Radicure shutting off....9/2
Post by: DCSP John on September 02, 2015, 11:35:02 AM

Just talked to M&R service about this strange issue.
The exhaust fan on the top of our Radicure has randomly shut off two times today.
The fix for us was to go through our normal dryer shut down procedure..
And, as the dryer is in 'cool down' mode, the fan turns back on.... Weird.

Anyone experience any thing like this on a Radicure?
We are going to check the voltage on the motor  once we stop production for the day...

John

Title: Re: Exhaust on 60" Radicure shutting off....9/2
Post by: Printficient on September 02, 2015, 12:10:48 PM

Call Winston

Title: Re: Exhaust on 60" Radicure shutting off....9/2
Post by: 244 on September 02, 2015, 03:45:17 PM

Quote from: DCSP John on September 02, 2015, 11:35:02 AM

Just talked to M&R service about this strange issue.
The exhaust fan on the top of our Radicure has randomly shut off two times today.
The fix for us was to go through our normal dryer shut down procedure..
And, as the dryer is in 'cool down' mode, the fan turns back on.... Weird.

Anyone experience any thing like this on a Radicure?
We are going to check the voltage on the motor  once we stop production for the day...

John

Your problem is due to maintenance. There are louvers on the box that the blower is connected to. They are there to mix in a little ambient air and not have the motor overheat. Clean the louvers out and your problem will go away.