TSB
screen printing => Equipment => Topic started by: dirkdiggler on September 22, 2015, 02:30:20 PM
-
We know you got em!
-
He aint got crap.
-
Hhahahah, been a bit crazy. Here's a few ;D
-
Few more
-
Some progress ;D
-
Come on. What's the hold up?
-
This Alphonso guy is awesome.
-
This Alphonso guy is awesome.
Don't say that too loud. You will spoil him! Good to see you are installing finally.
-
This Alphonso guy is awesome.
Don't say that too loud. You will spoil him! Good to see you are installing finally.
He's gotta be one of the most calm, patient, yet motivated guys I've seen. Getting suuuuuuper excited!
-
Did you finally get power?
-
Yes, had to over night a couple transforms in for today. Was able to get new air back there yesterday. Need gas guys to make some adjustments for us today on the pressure coming in. Red chilis are lit up. It's coming together now ;D. Think I still want a screw compressor though, or at least a bigger piston compressor. Having the room built outside next week to put the noise outside.
-
Yes, had to over night a couple transforms in for today. Was able to get new air back there yesterday. Need gas guys to make some adjustments for us today on the pressure coming in. Red chilis are lit up. It's coming together now ;D. Think I still want a screw compressor though, or at least a bigger piston compressor. Having the room built outside next week to put the noise outside.
Slowest build out ever. LOL
-
Looks good. Just curious, did they use double wall ductwork on the dryer or single wall. Congrats.
-
Ah Brandt, thanks for the positivity. Can't argue with the building department. But slow contractors don't help either ;D
Gary, single walled. Florida, warehouse already 115 degrees up there all summer long, and with that force, we won't be loosing much velocity through the pipe walls in our Fl winter. Up North, I'd go with the double wall though for sure. Everything I needed for the exhaust cost me 168 bucks from a local distributor. RE Michaels if you are looking for ducting and what not.
-
(https://scontent-mia1-1.xx.fbcdn.net/hphotos-xta1/t31.0-8/12002472_10208131121463603_3665794678862153156_o.jpg)
-
That's awesome M&R not only stands behind there equipment they even stand on it 8) as in the pic above, good deal Screen, I know you can't wait to start rolling out shirts.
d
-
That's awesome M&R not only stands behind there equipment they even stand on it 8) as in the pic above, good deal Screen, I know you can't wait to start rolling out shirts.
d
Thanks D. Maaaaaaaaaaaaaaan, it is fast!!!! He got it spinning just before end of day, and even with a stroke as long as it could go it was flying and he said, man that' slow watch what we do in a couple days lol. (https://scontent-mia1-1.xx.fbcdn.net/hphotos-xpf1/t31.0-8/11999825_10208133336918988_557390033897000587_o.jpg)
It's starting to grow legs. Some say spider, I prefer to say jumbo crab ;D
-
Congrats man, you work hard and deserve it. Now you just gotta learn how to print the shirts! :P
-
I see that they didn't bolt the press or supports to the cement. Do they do that anymore or they just didn't get to it yet?
-
Congrats man, you work hard and deserve it. Now you just gotta learn how to print the shirts! :P
Har Har Har Alex, ;D but thanks brother. Can't wait to be rock in out jobs on it.
-
I see that they didn't bolt the press or supports to the cement. Do they do that anymore or they just didn't get to it yet?
They do, he will be doing that tomorrow. He had just popped them in place to get all the feet adjusted and ready right before I snapped the pic. It's faaaaast! ;D
-
Congrats.
Pumps me up to work harder when I read great news.
Don't forget to post videos.
-
Congrats.
Pumps me up to work harder when I read great news.
Don't forget to post videos.
Thanks brother, it's a huge blessing to be in a position to make 5th us move! The support M&R's team members have been giving us is incredible. I'll put some bids up for sure.