TSB
screen printing => Ink and Chemicals => Topic started by: ericheartsu on October 21, 2015, 10:38:06 AM
-
Does anyone have one of these? Looking for some feedback if anyone uses one!
-
Are these the Picarelli guns?
We once talked a bit about getting parts
http://www.theshirtboard.com/index.php/topic,10652.msg102302.html#msg102302 (http://www.theshirtboard.com/index.php/topic,10652.msg102302.html#msg102302)
-
The Picarelli guns were a "could you/should you" device. Most found their resting place under the dryer. Ecko used them for thermoline clear but that was the best use for them. You doNOT want to clean them
-
I think Ericheartsu is referencing the New Buffalo auction. It listed a "Nazdar Ink Dispenser". This is the Wilflex DispenseMaster 4 unit.
There are numerous of these units out in the field; both at end users and Wilflex distributors (like Nazdar SourceOne) used for dispensing color formulations. The machine is proven technology throughout the years. Depending upon the initial purchase and set-up - can dispense either the standard MX style inks; or the Base and PC's / Equalizer systems.
-
I think Ericheartsu is referencing the New Buffalo auction. It listed a "Nazdar Ink Dispenser". This is the Wilflex DispenseMaster 4 unit.
There are numerous of these units out in the field; both at end users and Wilflex distributors (like Nazdar SourceOne) used for dispensing color formulations. The machine is proven technology throughout the years. Depending upon the initial purchase and set-up - can dispense either the standard MX style inks; or the Base and PC's / Equalizer systems.
Yep! Rob nailed it. sold for more than we needed it, but it looked very cool.