TSB

screen printing => Equipment => Topic started by: UnderPressureSP on December 15, 2015, 12:47:10 PM

Title: M&R GT-8 Part?
Post by: UnderPressureSP on December 15, 2015, 12:47:10 PM

So I broke this part and am looking for another one.  I contacted our parts place and was told that M&R no longer made these and I would have to weld the old piece back.  This is the part where the stroke arm attaches to the press and the piece that hit touches the proxy switch.   Any advice?

Title: Re: M&R GT-8 Part?
Post by: ZooCity on December 15, 2015, 12:53:32 PM

Try Bill with Aero or David at press tech. 

Sent from my SM-G900V using Tapatalk

Title: Re: M&R GT-8 Part?
Post by: UnderPressureSP on December 15, 2015, 12:59:10 PM

Thanks.  I will try Bill.  Already tried David with no luck.

Title: Re: M&R GT-8 Part?
Post by: Binkspot on December 15, 2015, 03:50:25 PM

Graphic parts international, Aero, CGS or local fab shop.

Title: Re: M&R GT-8 Part?
Post by: CGS on December 15, 2015, 04:16:16 PM

If you don't want to weld the block back on, give me a call, or email.

We have a few here.

Ph# 856-665-6154 - ask for Tony

email: info@screenprintsource.com

Title: Re: M&R GT-8 Part?
Post by: UnderPressureSP on December 15, 2015, 04:46:33 PM

Awesome.  Thanks!