TSB

screen printing => Equipment => Topic started by: Donnie on January 05, 2016, 04:01:02 PM

Title: Seedaire chiller.. Model 3YA49
Post by: Donnie on January 05, 2016, 04:01:02 PM

I think my chiller may be crapping out.... I've notice some moisture in the lines and in the Air moister catcher glass on the bottom of my press. I checked it and it seems to be running. I took the drain line out and place it in a pan. Very little moisture being collected in the pan. I guess my question is how do you know for sure when these puppies need replaced.

Title: Re: Seedaire chiller.. Model 3YA49
Post by: jvanick on January 05, 2016, 04:07:27 PM

you could just need a refrigerant charge...

any competent commercial HVAC guy should be able to look at it and troubleshoot it.

Title: Re: Seedaire chiller.. Model 3YA49
Post by: ebscreen on January 05, 2016, 08:19:33 PM

Does it have an over temp warning light? That would be the first clue if it does. I think most do.
Laser temp the coils? Maybe a clog in the draining system?

Title: Re: Seedaire chiller.. Model 3YA49
Post by: Donnie on January 05, 2016, 11:18:39 PM

The compressor seems to run hot.. I'll call an HAv guy