TSB

screen printing => Screen Making => Topic started by: shirtshack on January 06, 2016, 02:10:35 PM

Title: best way to prep ali screens for restretching?
Post by: shirtshack on January 06, 2016, 02:10:35 PM

When you want to restretch your own ali statics whats the procedure after you cut out the old mesh?
i assume angle grinder with a sanding disk if so what grit is best to use?

Title: Re: best way to prep ali screens for restretching?
Post by: Frog on January 06, 2016, 02:16:36 PM

If that is the route you go, make sure to wear a filter mask as the glue dust will be some nasty stuff