TSB

screen printing => Equipment => Topic started by: Maxie on January 13, 2016, 10:09:15 PM

Title: Laser system Wanted?
Post by: Maxie on January 13, 2016, 10:09:15 PM

I want to purchase a laser system for our automatic.
What are using?
I thought of two crosses,
Where can I buy a system?

Title: Re: Laser system Wanted?
Post by: TCT on January 13, 2016, 10:39:35 PM

MadeEz Solutions. Binkspot from the boards here, that is his company, he makes them.

Title: Re: Laser system Wanted?
Post by: jvanick on January 14, 2016, 10:17:05 AM

Second the made ez laser system. Been awesome here.

Title: Re: Laser system Wanted?
Post by: kingscreen on January 14, 2016, 10:50:26 AM

We have the MadeEZ lasers.  Excellent choice!

Title: Re: Laser system Wanted?
Post by: islandtees on January 14, 2016, 11:12:50 PM

Look at laseit.net   Good looking system

Title: Re: Laser system Wanted?
Post by: Maxie on January 15, 2016, 03:59:26 PM

Anybody using the LazeIt unit and can recommend it.
Is it easy to change position.

Title: Re: Laser system Wanted?
Post by: Admiral on January 15, 2016, 06:05:03 PM

We have the Laseit, easy to use, works great.  It is easy to adjust the placement and it stays in place just fine.  Had to replace a couple lasers that died down but very happy with it.  Couldn't compare to the MadeEZ.

Title: Re: Laser system Wanted?
Post by: Doug S on January 15, 2016, 09:12:58 PM

I have the 4 laser laseit but could've got by with the 2 just fine.  Just like Admiral mentioned it stay where it's supposed to.  Once you get it adjusted, you use an alan key to tighten it down.

Title: Re: Laser system Wanted?
Post by: TCT on January 16, 2016, 08:40:45 AM

The MadeEZ ones stay where you put them. We never had a issue with that. I have no reference on the Laseit system, but securing with a allan key after adjusting sounds horrible!

Title: Re: Laser system Wanted?
Post by: Ross_S on January 16, 2016, 09:37:33 AM

Laseit as well suspended from an I-beam so it's solid

Title: Re: Laser system Wanted?
Post by: Doug S on January 16, 2016, 11:23:55 AM

It would stay without using the alan key but I always go overkill.