TSB
General => Industry shows => Topic started by: Frog on January 16, 2016, 10:23:56 AM
-
Okay, how about those who wish to meet up at the show, gather together at 3:00 at the spot illustrated here.
3:00 should avoid any conflicts with conferences and classes.
Also, please, as we are getting really close, anybody planning on the TSB eats needs to contact me or Pierre.
So far, our count is a little lower than expected
-
is the meetup for friday and saturday, or just saturday?
-
In the past, at least when I was able to attend, it was Friday and Saturday. (I've never lasted through Sunday)
Last year, they added Sunday though I have no idea how successful it was.
From my experience, Friday is my favorite day for the show as there is way more elbow room, and the best give-aways are still available! ;)
My suggestion would be at least both Friday and Saturday, as those few minutes extra could snag someone you'd otherwise miss.
-
We are leaving out Tuesday. Pretty excited. Our 1st vacation in 5 years. I'm looking forward to meeting the TSB family.
-
From my experience, Friday is my favorite day for the show as there is way more elbow room
The floor was packed today, like really busy! Saturday is usually a little busier.
-
The sheer size of that floor plan is astounding. A visit to one of these big shows is going on my to do list.
-
According to ISS, Friday's attendance set a record for them!
-
It certainly felt really busy!
-
Agreed. We're almost scared of how many people will be there today.
-
Pierre just talked to me and he will be working in the Hanes booth during the meetup time, but as luck would have it, that is right by the meeting place!
So, if he is not with the group, take a few steps to say howdy.
-
Did not seem that crowded today. Missed the group meet at 3, if there was one. Saw Pierre, but he was busy. Dang Frog, it's not quite the same without your smiling face! Can't wait to try out some HSA ink after cruising the ink manufacturers. Hope to get the real dope at dinner tonight!
-
When are you lucky people that managed to get to LB going to give us some feedback on what was was new and/or interesting at the show.
Any cheaper CST machines?
-
I'm here right now. Today was and is nuts. In a good way! If you are not here you are missing out. Just putting faces to the names is amazing.
-
I'm here right now. Today was and is nuts. In a good way! If you are not here you are missing out. Just putting faces to the names is amazing.
Ditto^^
Absolutely Crazy.
If your not getting anything out of this, your probably not doing it right.
Sent from my XT1585 using Tapatalk
-
Great dinner last night, sorry I had to run and catch a plane.
As always we got to talking about toys that make like in the shop easier.
Here if the 'clipper' I was talking about with Jason and Tiffany.
http://www.fimor-serigraphy.com/products/accessories/clipper/ (http://www.fimor-serigraphy.com/products/accessories/clipper/)
Best to all,
-
I have that same exact clipper. Used it only a few times. If someone wants to buy it, message me an offer.
Sold!
-
Has any of you checked AB 9000 bagger at M&R?
-
Late last night I had a pic messaged to me of some of our group, apparently keeping the party going.
(http://14871-presscdn-0-39.pagely.netdna-cdn.com/wp-content/uploads/2015/08/rare20.jpg)
-
How did you get this pic of us from Pierre's balcony?
-
It was great to meet the ones that came last night. I read in a post a while back that Jason could put the beer down. Last night made me a believer, I had 3 of the beers that he was drinking and found myself with a little slur while he was just chugging along just fine. Anyway, I had fun and tried to take in a little knowledge at the same time. Gonna have to make more of the shows.
-
(https://scontent.fsnc1-1.fna.fbcdn.net/hphotos-xtp1/t31.0-8/12615439_10153781613655552_6478936129343796344_o.jpg)
Hey Everyone!
I just wanted to thank you all for making Jim, Sheri and David feel so welcomed at the dinner at Long Beach. They had a great time and loved all the feedback and - well to be honest - hearing how awesome we all are! You can't know how valuable your feed back is to us and how much it means that you are willing to kill your buzzes long enough to talk shop with us. So, cheers all and thank you for the invite again! How many of you will we get to see in AC this year? And no, I won't be there again, but keep up the banter and maybe they will put me on the circuit next year!
Ron
-
(https://scontent.fsnc1-1.fna.fbcdn.net/hphotos-xtp1/t31.0-8/12615439_10153781613655552_6478936129343796344_o.jpg)
Hey Everyone!
I just wanted to thank you all for making Jim, Sheri and David feel so welcomed at the dinner at Long Beach. They had a great time and loved all the feedback and - well to be honest - hearing how awesome we all are! You can't know how valuable your feed back is to us and how much it means that you are willing to kill your buzzes long enough to talk shop with us. So, cheers all and thank you for the invite again! How many of you will we get to see in AC this year? And no, I won't be there again, but keep up the banter and maybe they will put me on the circuit next year!
Ron
Good looking bunch, can't wait to hear results from Jason's trials on the Endurance panels.
-
Good looking bunch, can't wait to hear results from Jason's trials on the Endurance panels.
we're going to try to take the endurance panels to the next level with Shurloc applying some extra glue.. we're hoping that things work out so that the 'tape nazi' doesn't have to EVER tape M3 plastisol screens that she's using with the winged flood bars.