TSB
screen printing => Ink and Chemicals => Topic started by: Inkworks on February 11, 2016, 04:39:48 PM
-
I have a project for printing on large Cordura Nylon bags that will be too large to take a trip through the oven, the customer mentioned a different shop used an ink that "air dried" The sample sure looked and felt like plastisol. I'm wondering if regular plastisol with nylon catalyst would work, perhaps with a decent flash-cure to kick start it.
I guess my real question is: Is there a difference between Nylon Bonding Agent additive and a true Plastisol ink catalyst that will cause the ink to set up without a heat-cure?
Right now we have QCM QB 6600 (MF-66) which is called a "bonding agent" and while it works well, it's definitely different than the old catalyst I used in previous shops that would cure solid in the mixing container after 2-3 hours.
input? suggestions?
-
What you have in the bottle is the Rutland bonding agent.
And no, it does not cure solid in a few hours... or days really.....
As always - If you can heat the ink deposit up close to 300, it will really help to make the ink and catalyst bond well.
-
So what is the good old catalyst that sets the ink up solid in a few hours, i believe we used to get it from Wilflex, but that was 15-20 years ago. It was a bit of a pain as the agent itself would harden in it's own container after a year or so.
-
I know other ink companies went to a different formulation when the Ortho Phthalates were banned. The good stuff had it in them.
At QCM we found a formula that worked great.... but its no longer in use.
I have not found anything that is close to like it used to be.
Even International Coatings jacket catalyst does not harden up over night.....
-
Permaset has air drying ink for this.
And they are in the States now. Finally
-
Oh yeah it is at
wbiusa.com
Ask for TJ you will thank me
-
When I was with Riddell we used to print some large nylon bags that the dryers could not accommodate - could not wait for overnight curing(plus room for drying always an issue. Usually could find a way to use one of our heat presses(had clam shells and swing-aways in a number of sizes) with Teflon sheet to cure the ink.
Michael Jirasek
Anatol
mj@anatol.com