TSB

screen printing => Ink and Chemicals => Topic started by: Prosperi-Tees on March 30, 2016, 03:04:10 PM

Title: How would you print this?
Post by: Prosperi-Tees on March 30, 2016, 03:04:10 PM

Elastic bandages. The print does not look very good from what they got previously but were satisfied with them.

Title: Re: How would you print this?
Post by: im_mcguire on March 30, 2016, 03:05:37 PM

I would make a screen print transfer, and then heat press it...

Title: Re: How would you print this?
Post by: Colin on March 30, 2016, 03:11:48 PM

Waterbase.


But does it need to stretch with the bandage?

Title: Re: How would you print this?
Post by: Sbrem on March 30, 2016, 04:04:03 PM

You are going to unroll, print, dry and re-box too? Arrrrgggghhhhh!!!!!!

Steve

Title: Re: How would you print this?
Post by: Prosperi-Tees on March 30, 2016, 04:14:53 PM

Not too sure if those bandages stretch too much. Looks like I wouldn't have to unroll very far but yeah it does sound like a pain in the %^& especially if you drop one and it rolls across the shop.

Title: Re: How would you print this?
Post by: JBLUE on March 30, 2016, 10:39:19 PM

Waterbase works well on those.