TSB

screen printing => General Screen Printing => Topic started by: tonypep on April 14, 2016, 03:24:11 PM

Title: Tri Purpose Platen from Action
Post by: tonypep on April 14, 2016, 03:24:11 PM

I've designed a triple purpose pallet that does pockets, inside neck labels, and can accommodate a standard 15' print as well. So if your printing backs, then pockets........ just turn them around.  And, Bonus, it does 2 at a time on the pocket/label side. Erik is sending me a 3-d rendering to confirm the configuration and Bingo we have a winner. Much thanks to Erik and Mitzi on this project

Title: Re: Tri Purpose Platen from Action
Post by: mimosatexas on April 14, 2016, 05:31:08 PM

Don't they already have one of these with 3 pockets/tags on one side?

Title: Re: Tri Purpose Platen from Action
Post by: Underbase37 on April 14, 2016, 05:56:25 PM

Nice. Let's see what you come up with.

Murphy

Title: Re: Tri Purpose Platen from Action
Post by: tonypep on April 15, 2016, 04:44:30 AM

Quote from: mimosatexas on April 14, 2016, 05:31:08 PM

Don't they already have one of these with 3 pockets/tags on one side?

Mine is different.

Title: Re: Tri Purpose Platen from Action
Post by: jvanick on April 15, 2016, 07:37:56 AM

Quote from: mimosatexas on April 14, 2016, 05:31:08 PM

Don't they already have one of these with 3 pockets/tags on one side?

has anyone used those on an auto?  I'd think the screen 'snap' from the squeegee falling into the 'holes' between the wings would cause problems?