TSB

screen printing => Equipment => Topic started by: jvanick on May 09, 2016, 09:15:15 AM

Title: molded edge triple duro?
Post by: jvanick on May 09, 2016, 09:15:15 AM

does anyone make a molded triple duro squeegee?

it's time to replace our rubber and I was told that the molded edge squeegees will stay sharper for longer.

Title: Re: molded edge triple duro?
Post by: Printficient on May 09, 2016, 09:23:23 AM

Don't know about that specifically, but I used Pleiger solvent squeegees.  These hold up to cleaning chemistry longer and do not soften which is what causes a squeegee to dull.  Xenon sells this for $1.35 per inch.

Title: Re: molded edge triple duro?
Post by: IntegrityShirts on May 10, 2016, 09:00:40 AM

Call Saati. I have their red double bevel molded single duro. Not sure if they have a triple duro molded though.

http://www.saati.com/images/printing/accessories/duralife-squeegee.pdf (http://www.saati.com/images/printing/accessories/duralife-squeegee.pdf)

Title: Re: molded edge triple duro?
Post by: blue moon on May 11, 2016, 09:39:06 AM

molded edge stuff we had was not really sharp. It would be OK for spot colors, but we would not use it for anything with halftones. . .

pierre