TSB

screen printing => General Screen Printing => Topic started by: im_mcguire on May 12, 2016, 03:05:30 PM

Title: Can you help me on print order on this one?
Post by: im_mcguire on May 12, 2016, 03:05:30 PM

I'm looking to print this in this order: ( workhorse cutlass 6 color)
1-White base 150s mesh
2- red 230 mesh
3-light blue 230 mesh
4- yellow 230 mesh
5- flash
6- dark blue 230 mesh

Would there be any reason this wouldn't work? I have 2 flashbacks, or I can run it in orbital mode...

Let me know your thoughts, and thank you all!!!

Title: Re: Can you help me on print order on this one?
Post by: Prosperi-Tees on May 12, 2016, 03:09:24 PM

That is about what I would except maybe drop the yellow down to a 180 or so.

Title: Re: Can you help me on print order on this one?
Post by: 3Deep on May 12, 2016, 04:07:19 PM

To do only one flash I would do this

1 white = flash
2 Red
3 Dark Blue
4 Light Blue
5 Yellow

mesh counts looks fine to me, either way you go it will be fine since you have two flashes which will not slow you down.

Title: Re: Can you help me on print order on this one?
Post by: im_mcguire on May 12, 2016, 08:40:21 PM

I decided to go with how I originally thought... It turned out really well. Super smooth print!

Title: Re: Can you help me on print order on this one?
Post by: RICK STEFANICK on May 12, 2016, 09:46:58 PM

Your choice of mesh was dead on.. thats why that print ran so well.