TSB

screen printing => Screen Making => Topic started by: Dottonedan on June 21, 2016, 10:21:40 AM

Title: Re meshing static frame supplier in NH area?
Post by: Dottonedan on June 21, 2016, 10:21:40 AM

Anyone know of the company that can remesh static frames where you swap out or send in your old and they send you back the new ones?  This Co. Is in the Hampton NH/Salsbury Mass area.

Thanks
Dan

Title: Re: Re meshing static frame supplier in NH area?
Post by: broadway on June 21, 2016, 11:28:29 AM

Victory Factory in NY

Title: Re: Re meshing static frame supplier in NH area?
Post by: inkman996 on June 21, 2016, 12:01:29 PM

http://www.poconoscreen.com (http://www.poconoscreen.com) In Scranton

Title: Re: Re meshing static frame supplier in NH area?
Post by: Printficient on June 21, 2016, 12:49:13 PM

I don't understand how this can be done.  I send you a used static for remeshing and you send me a new one?  At what cost?  What happens to the used frame I sent in?  Is it sent out as "new" to the next person?  If done properly then the remeshed screen frame is usable for a long time and many remeshes.

Title: Re: Re meshing static frame supplier in NH area?
Post by: tonypep on June 21, 2016, 01:41:24 PM

Most cases the used screens are machine grinded, re-meshed then shipped back.

Title: Re: Re meshing static frame supplier in NH area?
Post by: Printficient on June 21, 2016, 01:42:42 PM

Quote from: tonypep on June 21, 2016, 01:41:24 PM

Most cases the used screens are machine grinded, re-meshed then shipped back.

You are correct.  At Xenon we do not use any knid of abrasive on the frame.

Title: Re: Re meshing static frame supplier in NH area?
Post by: Sbrem on June 21, 2016, 02:10:04 PM

Garston is in Haverhill, MA, (and Conn.) and Commercial Screen Supply is in Avon, MA...

Steve

Title: Re: Re meshing static frame supplier in NH area?
Post by: Dottonedan on June 26, 2016, 10:54:34 AM

Thanks all!   Much appreciated.

I find now that for me, our forum is adding on another benefit for me and my customers. I've had several Corel questions answered,  tape, and mesh are jus a few I can remember. Things I wouldn't normally be asking for as an artist.

Some of my customers register for the site and I know many of them just lurk by they are there. ;)

Thanks for the support!