TSB
screen printing => Equipment => DIY - From master engineered marvels to cobbled together jury-rigged or Jerry-built junk! => Topic started by: mimosatexas on August 09, 2016, 10:00:58 AM
-
Been meaning to make one of these for a while now and finally had a job where I absolutely needed it. Quick, cheap, and dirty, but working great. Have to set a filter on top still.
Works for cooling down the pallets during longer runs and for drying off between colors on multicolor flatstock (what I needed it for today).
-
Love It!!!, it just amaze me what we all have in our shops to get our jobs done, and then other companies take those idea's and make millions LOL again great idea
darryl
-
Is it blowing air onto or away from the platen?
-
Mike the it's turn it looks like it's blowing air onto the platen
-
I wonder about that Daryl, does it make more sense to pull the heat away like fans in a PC do?
-
Impossible to filter it that way and I'd think it would be less efficient. PC's are drawing in cool air from outside through an engineered case, sometimes pulling it through cooling fins by similar engineering.
This is just a ghetto fabulous way to get the heat off a shirt. Pulling the cool air straight in and down on the shirt pushing the heat off.
-
Air is blowing at the platen. MUCH faster that way (I was curious and tried both while watching with a laser thermometer). Mainly I use this when printing flatstock though when I don't want to remove it from the platen between colors, but has the added benefit of cooling down large plastisol bases late in a run when the pallets are starting to get too hot due to ambient shop temp etc.
-
This has me thinking again, a long time ago I thought of taking an empty 23 x 31 aluminum frame and lining it with some 140mm cooling fans run in series and a used power supply. Being in the frame it can be moved from one head to another quite easily since the power plug unplugs right from the PSU. Dunno it was a though back then, enough 140's can pull a lot of air for sure.
-
Yep, air at the platen is much better.
On the Diamondback I have put a couple 2x4' in the screen clamps and adjusted the clamps to hold a box fan, then just put that up there in the head. Very easy and effective.
Should work on front and rear clamps as well, never tried. Doesn't work on a manual of course..
-
This has me thinking again, a long time ago I thought of taking an empty 23 x 31 aluminum frame and lining it with some 140mm cooling fans run in series and a used power supply. Being in the frame it can be moved from one head to another quite easily since the power plug unplugs right from the PSU. Dunno it was a though back then, enough 140's can pull a lot of air for sure.
Would it look like this maybe?
:-)
-
This has me thinking again, a long time ago I thought of taking an empty 23 x 31 aluminum frame and lining it with some 140mm cooling fans run in series and a used power supply. Being in the frame it can be moved from one head to another quite easily since the power plug unplugs right from the PSU. Dunno it was a though back then, enough 140's can pull a lot of air for sure.
Would it look like this maybe?
:-)
Yea but it could be much simpler.
-
This has me thinking again, a long time ago I thought of taking an empty 23 x 31 aluminum frame and lining it with some 140mm cooling fans run in series and a used power supply. Being in the frame it can be moved from one head to another quite easily since the power plug unplugs right from the PSU. Dunno it was a though back then, enough 140's can pull a lot of air for sure.
Would it look like this maybe?
:-)
Yea but it could be much simpler.
Like this?
box fan + a used frame..
(http://www.oaknet.com/gallery/var/resizes/Screen-Printing/10151130_10153331908513032_7186131132791598404_n.jpg?m=1470773683.jpg)
I did add a furnace filter shortly after this pic was taken to help have less lint 'blown' into the hot ink.
-
The idea drawing Action has shown is something I talked with someone about many years ago and never did anything with it, because M&R had the Kool Mister I think everyone liked, I have a new design but trying to be very careful this time about running off at the mouth about it LOL