TSB
Classified Ads => Private listings => Topic started by: Evo on October 26, 2011, 04:04:37 AM
-
After many years of printing some great shirts for some great people, I am moving on to other creative ventures. Full manual screen printing shop for sale.
M&R Chameleon II 8/4 manual press
8 color, 4 station. Expandable to 14 color, 8 station
Heads have side clamps with air locks.
Press is in excellent condition, clean and ready to work. Excellent support/sampling press for an automated shop.
Includes 4x each adult, youth and sleeve pallets and 1 jacket hold down. Pallets are in fair to good condition. (some could use new rubber)
Also includes 2gal Husky mini compressor
$7,500.00
(http://evoscreenprinting.com/equip/cham1.JPG)
(http://evoscreenprinting.com/equip/cham2.JPG)
(http://evoscreenprinting.com/equip/cham3.JPG)
M&R Nuarc MSP 3140 exposure unit
Excellent condition with a like-new blanket. 120v 18A
$3,000.00
(http://evoscreenprinting.com/equip/msp3140_1.JPG)
(http://evoscreenprinting.com/equip/msp3140_2.JPG)
(http://evoscreenprinting.com/equip/msp3140_3.JPG)
M&R Tri-Loc
For 23"x31" frames. Excellent condition. Full system: includes master frame, pallet, stop block, pin bars and approx 40+ carrier sheets.
$1,100.00
(http://evoscreenprinting.com/equip/triloc1.JPG)
Nuarc VLT23F Light table
23"x28" classic steel light table. Very good condition. Includes grid for Tri-Loc.
$150.00
(http://evoscreenprinting.com/equip/lighttable.JPG)
^^ PACKAGE DEAL FOR PICKUP OF THE ABOVE 4 ITEMS: $11,000.00 ^^
Ranar Turbo Jetstar dryer
24" x 8' conveyor dryer with forced air.
220v 28A (single phase)
Works great and cures water based inks. (with a slow belt speed...manual printing only)
Belt could use replacement.
$900.00 OBO
(http://evoscreenprinting.com/equip/dryer1.JPG)
(http://evoscreenprinting.com/equip/dryer3.JPG)
Workhorse Primus flash dryer
18"x20" flash dryer with rolling stand.
115v 20A (twist-lock plug installed)
Very good condition.
Note: automatic swivel attachment will be included but I am not sure if it works.
$500.00
(http://evoscreenprinting.com/equip/flash1.JPG)
(http://evoscreenprinting.com/equip/flash2.JPG)
Newman M3 23"x31" roller frames
Approx 30 total: $20 to $30 each depending on condition, mesh, etc. Email me for a list.
(http://evoscreenprinting.com/equip/screen2.JPG)
(http://evoscreenprinting.com/equip/screen3.JPG)
Large rolling screen rack - 24 frames
Dual "z" rails - accommodates 23" or 25" wide frames up to 40" long
$200.00
(http://evoscreenprinting.com/equip/rack1.JPG)
Rolling screen rack - 14 frames
Accommodates 23"x31" frames
$100.00
(http://evoscreenprinting.com/equip/rack2.JPG)
Cap press
Older single color cap press. Funky but works well. Includes a couple used screens.
$40.00
(http://evoscreenprinting.com/equip/cappress.JPG)
Stainless steel washout booth
Shop-built stainless washout booth with riveted translucent HDPE back
Brand new Wall-mounted back-light fleuro fixture included.
Can accommodate 2 auto sized frames at once.
$475.00
(http://evoscreenprinting.com/equip/washout.JPG)
Dip tanks (2)
Easiway PT-520 diptanks, $100 each.
Very good condition. 37 gallon size accepts up to 5 auto sized frames.
New drain spigots
$100 each
Epson Stylus Pro 3000
Good condition. Includes original Epson box. (was backup film printer)
$150 obo
Squeegees
Misc wood handle squeegees from 6" to 20", most 70 durometer
$5 each
Spot cleaning gun
Good condition (rarely used)
$25.00
^^ PACKAGE DEAL FOR PICKUP OF ALL ITEMS LISTED: $13,000.00 ^^
Pickup from our location in Santa Rosa, CA preferred. (1 hour north of San Francisco)
Can crate and ship with buyer's expense and arrangement.
jason@evoscreenprinting.com
-
Man, that stuff looks like brand new. Someone is gonna make out on equipment that was well cared-for.
-
13K is a STEAL! Wish I lived in California.
-
very nice tools i wish i had the space to accomodate all of it
i`m sure it`ll sell quick good luck ;)
-
Dibs on the light table, Spot cleaner and some squeegees.
-
I'm curious why you wouldn't try to sell the whole business? You should be able to make more if you include your website and customers and employees? Why wouldn't an entrepreneur want to purchase an established business for ~$40k?
-
Why wouldn't an entrepreneur want to purchase an established business for ~$40k?
Off topic answer, but no one in their right mind would by for a business like ours greater than the value of the equipment. Buy the clientele? They have no real value to you as there is no certainty they continue to purchase from you. How many times have you seen a successful restaurant go under after a change in ownership? Happens quite often.
In short, if someone is selling a turn key shop and has their clientele listed as a value, run from the deal.
-
Agreed. My boss is retiring soon and told me he'll just sell me his equipment, doesn't want anything for the business because he can't guarantee that his clients will stay with me.
-
It happens all the time. I am sure tony knows more about some of the larger shops around here buying smaller ones. It can be done, and most businesses aren't purchasable frankly because most everything is in the boss's head. When a key person leaves, it's a scramble. But there are businesses that are worth more than just the equipment FYI.
Of course this is coming from a guy that paid $250K for a screen printing business and our CPA said it was worth double that.
-
Evo you've been PMed.
-
Evo you've been PMed.
He also specifically listed his email, which may be better if he is not online here. jason@evoscreenprinting.com
-
It happens all the time. I am sure tony knows more about some of the larger shops around here buying smaller ones. It can be done, and most businesses aren't purchasable frankly because most everything is in the boss's head. When a key person leaves, it's a scramble. But there are businesses that are worth more than just the equipment FYI.
Of course this is coming from a guy that paid $250K for a screen printing business and our CPA said it was worth double that.
So when you bought it was it worth = to the depreciated value of equipment? The CPA valued it twice what you payed?
I'm curious because I'm actually planning to build my business to sell it.
Sorry for being off topic, OP you have some sweet gear!
-
Dillon, get your ten posts in, get access to the restricted business section, and bring up this very topic.
-
Tri-Loc, M3 frames, light table, large screen rack, spot gun and hat press have been sold locally.
Still for sale:
Press
Dryer
Smaller screen rack
Washout booth
Dip tanks
Epson
Squeegees
Final package price before I separate the above: $9500.00 if picked up.
-
Tri-Loc, M3 frames, light table, large screen rack, spot gun and hat press have been sold locally.
Still for sale:
Press
Dryer
Smaller screen rack
Washout booth
Dip tanks
Epson
Squeegees
Final package price before I separate the above: $9500.00 if picked up.
how much for dip tanks , flash gone?
-
Tri-Loc, M3 frames, light table, large screen rack, spot gun and hat press have been sold locally.
Still for sale:
Press
Dryer
Smaller screen rack
Washout booth
Dip tanks
Epson
Squeegees
Final package price before I separate the above: $9500.00 if picked up.
how much for dip tanks , flash gone?
Ah, flash is still available. Missed that, sorry.
$200 for both dip tanks.
-
Tri-Loc, M3 frames, light table, large screen rack, spot gun and hat press have been sold locally.
I called dibs (5th post page 1) and sent you an email about the light table, spot gun and squeegee... never heard back from you.. ???
-
Tri-Loc, M3 frames, light table, large screen rack, spot gun and hat press have been sold locally.
I called dibs (5th post page 1) and sent you an email about the light table, spot gun and squeegee... never heard back from you.. ???
Dude, so sorry. Really. I have been dealing with a deluge of emails and PM's. An old friend came the by shop and scooped the Tri-Loc and frames, and the light table sorta went hand-in hand with it. (and to be honest, anything I don't have to ship is a relief...that would have been a bear)
Remind me never to move AND sell at the same time.
I still have the squeegees. I'll send you an email.
-
All I really wanted was the light table.. those things are hard to come by and the price was a once every 5 yr kinda thing.
I check the classifieds daily for those few remaining items on the want list.. a light table has been on there since day 1 and you never see the good ones show up. when you do they cost to much or it's somewhere on the east coast.
-
All I really wanted was the light table.. those things are hard to come by and the price was a once every 5 yr kinda thing.
You'd be surprised, I see all manor of these types of light tables for sale being that digital is finally killing the very last of any analogue reproduction techniques. (aside from the t-shirt bus anyway..) I do a fairly regular search for stuff like that on Craig's List.
Been drooling after this one:
http://sfbay.craigslist.org/sby/for/2664573207.html (http://sfbay.craigslist.org/sby/for/2664573207.html)
-
DUDE:
http://sandiego.craigslist.org/csd/art/2672370951.html (http://sandiego.craigslist.org/csd/art/2672370951.html)
That is the same one I was selling. Same price. Near you.
GET IT!
-
Of course.. two come along at the same time, gotta love how that happens.
Thanks Jason!
-
Of course.. two come along at the same time, gotta love how that happens.
Thanks Jason!
Cool, hope you got it.
-
Still for sale:
Press
Washout booth
Dip tanks
All else sold and/or spoken for.
To quote a gentleman that came by the shop today, "Holy crap, this press is pristine..."
-
Is the dip tank still available? Will 23x31 screens fit? I just found out that my easiway tank wont fit the 23s which really sucks!
-
Is the dip tank still available? Will 23x31 screens fit? I just found out that my easiway tank wont fit the 23s which really sucks!
Both dip tanks are still available. They will each fit 5 Newman M3 23x31's no prob. I think they can fit up to 25x36.
I'm trying to sell em with the washout booth as a package. Interested?
-
Is the dip tank still available? Will 23x31 screens fit? I just found out that my easiway tank wont fit the 23s which really sucks!
Both dip tanks are still available. They will each fit 5 Newman M3 23x31's no prob. I think they can fit up to 25x36.
I'm trying to sell em with the washout booth as a package. Interested?
It would be nice but 1, I dont have the room for that big of a washout booth and 2 if you missed my thread I just lost my day job so money is funny.
-
All sold, locally.
Thanks to everyone who emailed.