TSB
screen printing => Equipment => Topic started by: Logoman on September 20, 2016, 06:34:17 PM
-
I have an Auto that was made by National and M&R before National went out. It is a 6/8 all air. When the press rotates, table rises and prints but when it comes back down it falls and sounds like it is spamming down. How can this be fixed?
-
At the bottom of the machine you'll find an air pot that you can adjust up/down for table down cushion. You want it to drop fast but not slam, just a soft "thunk".
Table up is a trickier adjustment as it's tied into your index cyl and cushion and index pressure, etc.
-
I have an Auto that was made by National and M&R before National went out. It is a 6/8 all air. When the press rotates, table rises and prints but when it comes back down it falls and sounds like it is spamming down. How can this be fixed?
I didn't know such an animal existed... If you have time post a picture!!
What year is it??
-
I have an Auto that was made by National and M&R before National went out. It is a 6/8 all air. When the press rotates, table rises and prints but when it comes back down it falls and sounds like it is spamming down. How can this be fixed?
I didn't know such an animal existed... If you have time post a picture!!
What year is it??
Don't remember the year but it was some time ago. We private labeled around 50 for National.
-
I will post a pic in the morning but it is Purple.