TSB

Direct to Garment => DTG - General => Topic started by: mk162 on November 09, 2016, 04:03:26 PM

Title: New Direct to substrate printer for 3D objects
Post by: mk162 on November 09, 2016, 04:03:26 PM

Wasn't sure where to put this exactly, but a customer of ours built a new print that can print on nearly everything...

https://www.youtube.com/watch?v=Iup5UIBNBTo (https://www.youtube.com/watch?v=Iup5UIBNBTo)

I am not sure how fast it is if you are printing the same object over and over again.  There is one of these a few miles north of me and I might scoot up there to check it out.

Title: Re: New Direct to substrate printer for 3D objects
Post by: zanegun08 on November 09, 2016, 08:25:09 PM

All of their machines look nuts!

Think DTG machine is expensive, wonder the cost on this thing?  To print 1 soccer ball at a time!?

The future is expensive

Title: Re: New Direct to substrate printer for 3D objects
Post by: Ross_S on November 10, 2016, 08:04:04 AM

It does look expensive but that was cool.  I think the real question is, does that ink adhere to all substrates?