TSB
screen printing => General Screen Printing => Topic started by: Croft on December 15, 2016, 09:35:01 AM
-
just checking to see if anyone has a player number location that may have seen that was cool or something they may have done that was liked? I'm doing some hoodies for my sons team so I thought I might try something different than back large front left chest small above design or on hood. Any ideas would be appreciated, I'm going to cad cut so anywhere is possible
-
really screw them up...use binary code the no 10 would be 00110001 00110000
mooseman
-
Yep do a small 3 inch number one one sleeve and a large 5 inch number on the other sleeve, I would say put a number on the hood but most don;t wear the hood that often....oh and you could since your doing the cutting put there name under the 3 inch number.
darryl
-
small number on center of the pocket or embroidered just above the cuff on the sleeve.
-
Only so many placements that don't look stupid. I would focus on picking a cool font and style for the numbers but still use standard locations. You could maybe do something like putting the top half of the numbers on one sleeve and the bottom have on the other so they could cross or stack their arms in front of them and show the full number. Would be kind of like the gloves you see a lot of teams wearing.
-
really screw them up...use binary code the no 10 would be 00110001 00110000
mooseman
Binary right off the hop, get back to work ;)