TSB
Heat Seal - Heat Press - Whatever you want to call it! => General Heat Seal => Topic started by: mooseman on February 17, 2017, 01:34:11 PM
-
A little bit ago there was some chatter about holding the vinyl heat seal sheet while trying to weed the image.
Got a wild idea this week that involved my manual press.
I simply stuck the vinyl heat seal carrier sheet to my press pallet just like a tee shirt.
It worked the nuts and held the carrier sheet like glue,well it kinda is glue????????
We use water based adhesive and the sheet peeled up nicely when done.
Going to make a dedicated board with the water based adhesive , we use Tekbond, for future jobs.
Only drawback is it can be a pain to get the weeded elements off the board if they get stuck to it but it sure did speed up the process and there was no gunk on the carrier sheet to goof up the heat press.
mooseman
-
A little bit ago there was some chatter about holding the vinyl heat seal sheet while trying to weed the image.
Got a wild idea this week that involved my manual press.
I simply stuck the vinyl heat seal carrier sheet to my press pallet just like a tee shirt.
It worked the nuts and held the carrier sheet like glue,well it kinda is glue????????
We use water based adhesive and the sheet peeled up nicely when done.
Going to make a dedicated board with the water based adhesive , we use Tekbond, for future jobs.
Only drawback is it can be a pain to get the weeded elements off the board if they get stuck to it but it sure did speed up the process and there was no gunk on the carrier sheet to goof up the heat press.
mooseman
I'm a little slow.
Show me a pic or two
-
No such thing as an easy wedding ;)
-
Tony, the wedding is easy, the reception usually a blast, but man, when the honeymoon is over.....
-
anybody else have Elvis in their wedding? It took a while to talk my wife into it, but how could you do Vegas without Elvis???
(http://www.lowcarbfriends.com/bbs/images/smilies/rocknroll_2011.gif)
pierre
-
I'm pretty sure there are laws against Vegas weddings without Elvis...speaking of pictures, let's see 'em.
-
Off topic :o LOL but he did say wedding didn't he ;D
-
No such thing as an easy wedding ;)
They are all easy hell you can get one for just about $40.00 anywhere.
It is the un-wedding that will kill ya. Kinda like the Mothers And Fathers Italian Association....THERE IS NO EASY WAY OUT
mooseman
-
A little bit ago there was some chatter about holding the vinyl heat seal sheet while trying to weed the image.
Got a wild idea this week that involved my manual press.
I simply stuck the vinyl heat seal carrier sheet to my press pallet just like a tee shirt.
It worked the nuts and held the carrier sheet like glue,well it kinda is glue????????
We use water based adhesive and the sheet peeled up nicely when done.
Going to make a dedicated board with the water based adhesive , we use Tekbond, for future jobs.
Only drawback is it can be a pain to get the weeded elements off the board if they get stuck to it but it sure did speed up the process and there was no gunk on the carrier sheet to goof up the heat press.
mooseman
I'm a little slow.
Show me a pic or two
of the wedding, weeding or weed, actually i made a video of one of these can't remember which one though all kind of went up in smoke.
mooseman
https://youtu.be/0G0E0vJ4ncU
-
Great idea! Thanks for sharing!