TSB
screen printing => Equipment => Topic started by: AAMike on March 22, 2017, 04:32:07 PM
-
Need an affordable laser for placement on auto press.
Thanks,
Mike
-
These folks:
http://www.aixiz.com/ (http://www.aixiz.com/)
Have everything you need. Plus you get to travel back in time to a mid 90's website.
Get the module, lens and holder. We like the straight line pattern. The crosshairs don't
work out like you would think unless you can place laser directly above substrate with no angle.
We use the "Module Rack" holders for easy positioning and install a magnet on the bottom to move
it around if need be (S-Types). That blue flexible stuff with orange fittings someone linked to would
work as well.
A quality regulated power supply is most important. In the past we used a wallwart and laser life was pretty short.
We have 4 lasers per press at probably $60 each machine.
(Doesn't touch the Roq setup though)
-
I bought some cheap stuff on Ebay from China.
Might get a proper mount here
http://www.aflatek.eu/356-brackets (http://www.aflatek.eu/356-brackets)
Especially this one caught my eye
http://www.aflatek.eu/brackets/1422-hol-uni16a-flexible-line-laser-mount.html (http://www.aflatek.eu/brackets/1422-hol-uni16a-flexible-line-laser-mount.html)
-
Here's ours. Ugly and works.
(https://uploads.tapatalk-cdn.com/20170326/a230cb63c91df6433231961130377685.jpg)
(https://uploads.tapatalk-cdn.com/20170326/e376f7f75e2752bc4371bbe8ead6701b.jpg)
Sent from my iPhone using Tapatalk
-
These folks:
[url]http://www.aixiz.com/[/url] ([url]http://www.aixiz.com/[/url])
Have everything you need. Plus you get to travel back in time to a mid 90's website.
Get the module, lens and holder. We like the straight line pattern. The crosshairs don't
work out like you would think unless you can place laser directly above substrate with no angle.
We use the "Module Rack" holders for easy positioning and install a magnet on the bottom to move
it around if need be (S-Types). That blue flexible stuff with orange fittings someone linked to would
work as well.
A quality regulated power supply is most important. In the past we used a wallwart and laser life was pretty short.
We have 4 lasers per press at probably $60 each machine.
(Doesn't touch the Roq setup though)
Holy crap, this website... ;D ;D ;D
-
I am building some laser alignment units and will have them available in the coming week.
They will be very affordable, if you're interested.
-
Here's ours. Ugly and works.
(https://uploads.tapatalk-cdn.com/20170326/a230cb63c91df6433231961130377685.jpg)
(https://uploads.tapatalk-cdn.com/20170326/e376f7f75e2752bc4371bbe8ead6701b.jpg)
Sent from my iPhone using Tapatalk
I do like the flexible mounts you are using. Where did you find those?
-
I do like the flexible mounts you are using. Where did you find those?
Amazon! But I'm sure these could also be sourced a bit cheaper from overseas like the lasers.
Sent from my iPhone using Tapatalk
-
I do like the flexible mounts you are using. Where did you find those?
Amazon! But I'm sure these could also be sourced a bit cheaper from overseas like the lasers.
Sent from my iPhone using Tapatalk
Would you mind posting a product link here. Did not manage to find anything like it on Amazon.
-
https://www.amazon.com/Stage-Microphone-19-inch-Gooseneck-Black/dp/B00080KNG8/ref=sr_1_3?ie=UTF8&qid=1491232293&sr=8-3&keywords=flexible+mike&tag=wwwwarriorsof-20 (https://www.amazon.com/Stage-Microphone-19-inch-Gooseneck-Black/dp/B00080KNG8/ref=sr_1_3?ie=UTF8&qid=1491232293&sr=8-3&keywords=flexible+mike&tag=wwwwarriorsof-20)
https://snakeclamp.com/Category/flexible-metal-gooseneck-hose-arm (https://snakeclamp.com/Category/flexible-metal-gooseneck-hose-arm)
-
aixiz.com
Just got our 4 lasers, power supplies and mounting units. Cheap and functional.