TSB
screen printing => Tips and Tricks to Share (Please don't ask questions here) => Topic started by: inkman996 on November 08, 2011, 02:46:57 PM
-
I have a large inventory of the new panel frames. I got really lazy and counted on the printed mesh count on the corner of the panels. Lately they are getting much harder to read and some i cannot even read anymore so I have to use the mesh determiner tool.
Well today I decided I need to mark them better, I was going to head to staples and by color stickers. Then it dawned on me.
My 110's are now next day air
My 160's are now 2nd day airs
My 200's are now third day airs
Yep used free labels from UPS. I put one on opposite corners and covered with clear tape for extra insurance.
Thought I would share.
P.S no need to see color in your dark room since each label has type on it. I stuck directly on the wall each label and wrote the mesh count it signifies.
-
UPS has been notified of the illegal use of their labels. You will be receiving a bill.
That is actually a good idea. I might have to steal that one.
-
I might have to steal that one
Then i will forward you the bill from UPS ;D
-
if you send it via mail, it will never get here. ;D
I love recycling things like that.
-
What's next, turning USPS boxes inside out?
Good idea though.
-
hey Mike...want more panelframes? smokin deal...
-
Nice.
-
Industrial Sharpie.
http://www.sharpie.com/enNZ/Products/Pages/ProductDetails.aspx?pid=SharpieIndustrialFineExtraFine%28Sharpie%20Catalog%29 (http://www.sharpie.com/enNZ/Products/Pages/ProductDetails.aspx?pid=SharpieIndustrialFineExtraFine%28Sharpie%20Catalog%29)
Most haze removers I've used have no effect on it.
-
Industrial Sharpie.
[url]http://www.sharpie.com/enNZ/Products/Pages/ProductDetails.aspx?pid=SharpieIndustrialFineExtraFine%28Sharpie%20Catalog%29[/url] ([url]http://www.sharpie.com/enNZ/Products/Pages/ProductDetails.aspx?pid=SharpieIndustrialFineExtraFine%28Sharpie%20Catalog%29[/url])
Most haze removers I've used have no effect on it.
I do some work for a urology office here in town and they use those markers to right on the "sample" cups. Only marker that will stay on those cups.
-
I just use a permanent marker on the short sides of our frames and put a strip of packing tape over the number. Surprisingly the packing tape never comes off and the number is always legible, even through the dip tank. I've read about many different ways to keep track of your mesh counts and I like the color coded ideas and they are all good in their own way. The way we do it works great but it's simple and boring.
-
I just use a permanent marker on the short sides of our frames and put a strip of packing tape over the number. Surprisingly the packing tape never comes off and the number is always legible, even through the dip tank. I've read about many different ways to keep track of your mesh counts and I like the color coded ideas and they are all good in their own way. The way we do it works great but it's simple and boring.
I write the mesh count and thread diameter on the lower left corner of the mesh, above where any corner tape will go. Then to the right of that, the tension reading at each tensioning and re-tensioning.
So a screen might read "180/55 20.28.35.38.40"
Simple.
-
I have started cutting numbers with my vinyl cutter and applying them to the frame, and cover those with either packing tape or regular scotch tape (either one holds up fine). I place them on one side only and in the same spot on the same side of the frame. When the screens in the rack are right-side up and on the left-hand side, I know they are coated and ready to go. Any other way is uncoated.
(http://i362.photobucket.com/albums/oo67/MisterTeesOnline/2011-11-08225638.jpg)
Yeah, Im a bit OCD about some things. One benefit with this is that if I ever have the frame remeshed with a different mesh count, the labels peel off easily.
-
hey Mike...want more panelframes? smokin deal...
Hell yea send me an email with details!
-
Why did I not know industrial sharpies existed?
-
Strange maybe it is the way we wash our screens I have tried over the years many label systems and even spray painted enamel numbers on the frames and they always washed off. Pocono has some type of stamp they use right on the frame and it never washes off wish i knew what the ink was,.
-
Strange maybe it is the way we wash our screens I have tried over the years many label systems and even spray painted enamel numbers on the frames and they always washed off. Pocono has some type of stamp they use right on the frame and it never washes off wish i knew what the ink was,.
Other than industrial Sharpies, the best thing I've found is Dymo embossed labels. They DO NOT come off, even in the dip tank, and the embossed lettering can't be washed out.
http://sites.dymo.com/Solutions/Pages/Product_Details.aspx?SegmentName=Home%28DYMO_US1%29&cat=Home_EmbossingLabelMakers%28DYMO_US1%29&prod=12965%28DYMO%29&page=1 (http://sites.dymo.com/Solutions/Pages/Product_Details.aspx?SegmentName=Home%28DYMO_US1%29&cat=Home_EmbossingLabelMakers%28DYMO_US1%29&prod=12965%28DYMO%29&page=1)
-
Engraved Formica screwed or glued to frames.
-
A small piece of colored duct tape...orange is 160s, purple is 200s...and so on. Ive tried industrial markers and label but for us this works the best
-
I have started cutting numbers with my vinyl cutter and applying them to the frame, and cover those with either packing tape or regular scotch tape (either one holds up fine). I place them on one side only and in the same spot on the same side of the frame. When the screens in the rack are right-side up and on the left-hand side, I know they are coated and ready to go. Any other way is uncoated.
Ditto on the vinyl cut , but we haven't had to bother with the packing tape, but then we don't have the diptank....yet.
-
Got roller frames..
different colored zip ties on opposing corners.
have static frames.. you're on your own.
-
finger nail polish on the mesh, you get to pick the color that suits your mesh code and eye color. Put it on the mesh in the softened area of the corners.
We find marking the frame gets to be a problem when we remesh with a different mesh count and have to change the code on the frame.
sharpie with a coating of clear fingernail polish or super glue.
mooseman