TSB
screen printing => Equipment => Topic started by: rmonks on June 04, 2017, 03:24:02 PM
-
My stop shocks on my gauntlet print arms are wearing out, having a lot of slamming going on. Need to fix this. I thought I saw some post here where someone mentioned replacing theirs with solid bumpers. Where can I get them.
-
My stop shocks on my gauntlet print arms are wearing out, having a lot of slamming going on. Need to fix this. I thought I saw some post here where someone mentioned replacing theirs with solid bumpers. Where can I get them.
store.mrprint.com
-
Be sure to order the ones from M/R. There are others out there but they chip, get hard and crack and even worse bounce.
-
We run the rubber bumpers here. When we run the heads full speed it does like slam more than I like, but its not the worst. Haven't noticed any bouncing, but I'll be looking for it now. Maybe try one or two before you go replacing all of them. Some like em, others don't. I like em myself. The less parts I have to replace, the better. these dont look like they will ever wear out to me. I picked them up from Aero / Crazy Ricks field of parts.
-
We sell durable synthetic head cushions, these are very durable and a lot of value as opposed to Urethane (UV breaks these down) or expensive gas shocks. Our part number is 1.9161005A and our website is aero-inc.com