TSB

screen printing => Ink and Chemicals => Topic started by: Gilligan on July 26, 2017, 10:42:05 AM

Title: ER6 dilution ratio for direct application
Post by: Gilligan on July 26, 2017, 10:42:05 AM

Anyone using Saati ER6 as a direct application, spraying on the screen vs dip tank?

What are you diluting the concentrate by?  Instructions say 10:1, but that also is for the dip tank part of the instructions.

Title: Re: ER6 dilution ratio for direct application
Post by: ericheartsu on July 26, 2017, 10:44:53 AM

We use ER2. let me look at what we dilute it to. 10:1 sounds right though

Title: Re: ER6 dilution ratio for direct application
Post by: Gilligan on July 26, 2017, 10:46:36 AM

Quote from: ericheartsu on July 26, 2017, 10:44:53 AM

We use ER2. let me look at what we dilute it to. 10:1 sounds right though

ER2 instructions say 35:1

My understanding is they are all the same chemicals just different levels of concentration.