TSB
screen printing => General Screen Printing => Topic started by: Rockers on August 02, 2017, 10:29:00 PM
-
I never had this issue before but then we never printed Liquid Silver onto LuLuLemon running tops. We underbased the silver with poly white, looked all good at the end of the dryer and even as they arrived at the clients. But after the first wash he said the silver effect was all gone and now the print just looks grey. Shirt color is grey too by the way.
Can`t imagine that this would be due to the silver not adhering to the base proper. I would assume in that case the silver would just completely wash off and the base would become visible. The way he described it is that the whole print turned evenly grey.
-
Something leads me to believe that it probably wasn't washed properly by the customer since they usually don't know any better, especially with special effects ink. Most likely just tossed it in the wash, and the general abrasion from washing and drying just dulled the shimmery look.
I'm not sure if this is even possible, but in the future you may want to look at doing a clear base or clear gel print over the top of it to maybe give it a bit of a barrier that will preserve the shiny look (or it could dull it, just guessing at some other options).
-
Something leads me to believe that it probably wasn't washed properly by the customer since they usually don't know any better, especially with special effects ink. Most likely just tossed it in the wash, and the general abrasion from washing and drying just dulled the shimmery look.
I'm not sure if this is even possible, but in the future you may want to look at doing a clear base or clear gel print over the top of it to maybe give it a bit of a barrier that will preserve the shiny look (or it could dull it, just guessing at some other options).
Exactly, I get the best results running that product without a base. Its always a possibility you over flashed the base. Usually you can get 5 washes without much tarnishing also retention time with that product is important especially with IR dryers due to the reflection. p/f/p incurs better results than a white base with that product.
-
Customer complained about our silver washing out.
We assumed we did not cure long enough because silver is a good reflector of heat.
-
Customer complained about our silver washing out.
We assumed we did not cure long enough because silver is a good reflector of heat.
You assumed rightly!
And, in my experience, especially with the true metallics like Liquid Silver rather than the more user friendly shimmers.
-
as mentioned above, don't white underbase it, double hit it and it will stay silver longer, Crazy thing that this stuff does, had to learn the hard way
-
Wilflex recommends printing their liquid silver directly onto the garment, and the addition of an over-print clear to protect the ink film from abrasion.
-
Wilflex recommends printing their liquid silver directly onto the garment, and the addition of an over-print clear to protect the ink film from abrasion.
Hi all
Note that "cold" wash only is advised for this product.
To improve the wash resistance you either print a clear over the silver as Peter suggested or, my favourite is to add 5-10% Epic HDClear into the Liquid Silver - this adds additional gloss as well as enhanced wash/abrasion resistance - plus you save a screen
Sent from my iPad using Tapatalk
-
Wilflex recommends printing their liquid silver directly onto the garment, and the addition of an over-print clear to protect the ink film from abrasion.
Hi all
Note that "cold" wash only is advised for this product.
To improve the wash resistance you either print a clear over the silver as Peter suggested or, my favourite is to add 5-10% Epic HDClear into the Liquid Silver - this adds additional gloss as well as enhanced wash/abrasion resistance - plus you save a screen
never thought of adding the clear to the ink? . Thanks
-
Hi Rockers, just print liquid silver metallic as a mask(underbase) and liquid silver metallic on top. 86 mesh
You should recommend your customers silver shimmer instead liquid silver metallic .