TSB

screen printing => Equipment => Topic started by: Maxie on August 16, 2017, 10:46:12 AM

Title: Problems with 4880
Post by: Maxie on August 16, 2017, 10:46:12 AM

I have two problems with my 4880 after a power failure.
1 The ethernet connection at the back shows red and orange and not green and orange.     Checked cables etc, seems to be a problem with the printer.
2 The printer is cutting a piece of film about 4" after every page.
Anybody have any suggestions?

Title: Re: Problems with 4880
Post by: cbjamel on August 16, 2017, 10:53:32 AM

Make sure its not a cross over cable should be a straight thru if i remember. On the 4" there is an eye to turn off and will solve problem.

Shane

Title: Re: Problems with 4880
Post by: blue moon on August 16, 2017, 02:02:27 PM

Quote from: Maxie on August 16, 2017, 10:46:12 AM

I have two problems with my 4880 after a power failure.
1 The ethernet connection at the back shows red and orange and not green and orange.     Checked cables etc, seems to be a problem with the printer.
2 The printer is cutting a piece of film about 4" after every page.
Anybody have any suggestions?

I have 4880 with a bad head sitting here, so if you need the Ethernet module you can have it (or anything else you might need).

pierre