TSB
screen printing => Equipment => Topic started by: Admiral on November 27, 2017, 03:53:22 PM
-
I've had 2 hang ups on me from parts department right now, one most likely from a tech calling from an 800 number that hung up 3 seconds in.
My reception is 5 bars of 4G...doubt it's my cell phone.
Really need to get this Challenger 3 running again.
-
Also when calling parts department the menu went through correctly then I got the operator and had to be transferred to parts department...which is what I called in the first place!
-
Ordered 2 parts - I am guessing at what was needed unfortunately, still no contact from a technician.
-
Whats the issue? I have a CHIII
-
... had good luck with their parts dept just last week.
Ordered (online) 4 new 16x22 pallets, a dozen pallet cam locks and an off-contact cam for a Kruzer.
Placed the order on Wed and took delivery on Friday.
-
Kept calling and got in touch, at like 3:05 est, parts should have shipped out for overnight delivery. I had to guess on the parts before troubleshooting with a tech and should have the right part for tomorrow.
The issue on the CH3 was everything went blank and stopped working - no more screen, can't move / print anything. Seems to be the 24v power supply died.
As for the phones mis-connecting, I have had that once before with M&R but usually get in touch finally.
Last time I called tech support I just stayed on the line instead of leaving the call back #.
-
Kept calling and got in touch, at like 3:05 est, parts should have shipped out for overnight delivery. I had to guess on the parts before troubleshooting with a tech and should have the right part for tomorrow.
The issue on the CH3 was everything went blank and stopped working - no more screen, can't move / print anything. Seems to be the 24v power supply died.
As for the phones mis-connecting, I have had that once before with M&R but usually get in touch finally.
Last time I called tech support I just stayed on the line instead of leaving the call back #.
please e mail me the number you called from. Our system records every incoming and outbound call from Service and parts. I will look into tomorrow and let you know what the problem was. I would not suggest holding on instead of leaving message. Once the message is left our system makes the call from the next available parts or service persons phone automatically.
-
Kept calling and got in touch, at like 3:05 est, parts should have shipped out for overnight delivery. I had to guess on the parts before troubleshooting with a tech and should have the right part for tomorrow.
The issue on the CH3 was everything went blank and stopped working - no more screen, can't move / print anything. Seems to be the 24v power supply died.
As for the phones mis-connecting, I have had that once before with M&R but usually get in touch finally.
Last time I called tech support I just stayed on the line instead of leaving the call back #.
please e mail me the number you called from. Our system records every incoming and outbound call from Service and parts. I will look into tomorrow and let you know what the problem was. I would not suggest holding on instead of leaving message. Once the message is left our system makes the call from the next available parts or service persons phone automatically.
Will do.
Part came in and replaced, everything is back up!
-
Parts and technicians depts are usually pretty spot on in my experiences. I use the call back option and it works fine.