TSB
screen printing => Ink and Chemicals => Topic started by: Sbrem on January 17, 2018, 10:46:49 AM
-
We're printing 400 pieces with Union DSSP1003 White, and have a second color, Cool Gray 8; do we simply get some Aerotex Black and add it? Or is that just too easy? Also we'll need a retarder, but I see at their site that they have no actual instruction on it's use... any advice is appreciated.
Steve
-
Not sure what kind of grey you are going for but I would base it down a lot as well. If Cool grey - they tend to use a very small amount of fluorescent yellow and marine blue it looks like too.
-
We're printing 400 pieces with Union DSSP1003 White, and have a second color, Cool Gray 8; do we simply get some Aerotex Black and add it? Or is that just too easy? Also we'll need a retarder, but I see at their site that they have no actual instruction on it's use... any advice is appreciated.
Steve
That would work. add the black. it really is that easy
-
Thanks all, I got a reply from the Rutland rep (they're all PolyOne now it seems) and he stated pretty much the same. I assumed, but that usually ends up biting me you know where...
Steve
-
That's awesome to know. I didn't think there was any way that would work.