TSB

Classified Ads => Private listings => Topic started by: paradoxsc on March 09, 2018, 02:08:43 PM

Title: Would anyone be interested in this inverted pre-reg kit?
Post by: paradoxsc on March 09, 2018, 02:08:43 PM

I made one and posted the instructions here:
http://www.theshirtboard.com/index.php/topic,20748.0.html (http://www.theshirtboard.com/index.php/topic,20748.0.html)

I'm trying to get a feel for who might want the pre-cut aluminum pieces as a kit so they can do it themselves. I figure $600 for both jigs and the stop blocks is fair. The rest you can do on your own fairly cheaply.

I'll pre-tap(thread) the holes for another $100 (tap kit and oil is cheaper)

If I can get at least 5 people to commit, I'll make them.

Title: Re: Would anyone be interested in this inverted pre-reg kit?
Post by: paradoxsc on March 09, 2018, 02:18:33 PM

I'll also do the pallet arm stop block for an extra $50