TSB

screen printing => Equipment => Topic started by: Logoman on May 06, 2019, 01:59:39 PM

Title: Motor for National Dryer
Post by: Logoman on May 06, 2019, 01:59:39 PM

I have an old National Dryer (N4819G) the belt motor is going out. Anyone have a motor or know where to get one at a reasonable price.

Title: Re: Motor for National Dryer
Post by: rmonks on May 06, 2019, 08:34:56 PM

I got one at Grainger once up on a time. You can probably get the numbers off your motor and google it and find one.

Title: Re: Motor for National Dryer
Post by: BrazosDesigns on May 15, 2019, 10:47:51 PM

Exactly what rmonks said.  Grainger...has it all

But.....for a cheaper experience for most of the same items Grainger has and free shipping over $50, I buy from Zoro.com   Often there are coupon codes for 20% off, etc.

I used a National 2408 for several years...

Title: Re: Motor for National Dryer
Post by: mk162 on May 16, 2019, 08:26:56 AM

Our Grainger down the street doesn't stock anything anymore it seems.  We use McMaster and wait a day.  Or it's about a 45 minute drive from me if I am in a bind.

Title: Re: Motor for National Dryer
Post by: Northland on May 16, 2019, 12:50:18 PM

Quote from: Logoman on May 06, 2019, 01:59:39 PM

I have an old National Dryer (N4819G) the belt motor is going out. Anyone have a motor or know where to get one at a reasonable price.

If it is a DC motor (most belt motors are)..... it might be worth your while to try removing & then re-install the carbon brushes (to free them up).
As carbon brushes wear they shed carbon powder that can cause the brush to hang up -or- squeek.