TSB

Heat Seal - Heat Press - Whatever you want to call it! => General Heat Seal => Topic started by: Sbrem on October 09, 2019, 10:17:20 AM

Title: Reflective Heat Seal vinyl
Post by: Sbrem on October 09, 2019, 10:17:20 AM

I have a potential order for 200 jackets with waterproofing, that need reflective vinyl on the left front, the right sleeve, and full back. I do not want to cut and weed that, and haven't had a lot of time to run a supplier down for that, TE doesn't offer it, nor does Howard. Any suggestions, and thanks in advance

Steve

Title: Re: Reflective Heat Seal vinyl
Post by: twins on October 09, 2019, 11:21:18 AM

Apex has some nice reflective stuff.

https://www.apextransfers.com/ (https://www.apextransfers.com/)

Title: Re: Reflective Heat Seal vinyl
Post by: Sbrem on October 09, 2019, 11:40:04 AM

Quote from: twins on October 09, 2019, 11:21:18 AM

Apex has some nice reflective stuff.

https://www.apextransfers.com/ (https://www.apextransfers.com/)

Thanks, I just sent in an RFQ

Steve

Title: Re: Reflective Heat Seal vinyl
Post by: blue moon on October 09, 2019, 11:45:23 AM

stahls will CAD Cut from 3M material which pretty tough and very reflective (and ANSI compliant). Expensive though. . .

pierre

Title: Re: Reflective Heat Seal vinyl
Post by: royster13 on October 10, 2019, 12:11:53 AM

Just make sure the waterproofing does not "mess up" adhesion....And sometimes the problem will not arise until the 1st few trips through the washer and dryer....

Title: Re: Reflective Heat Seal vinyl
Post by: Sbrem on October 10, 2019, 09:08:56 AM

Apex can screen them, they are sending me a sample to test on the jacket for adhesion, and to also see if the mesh lining leaves an impression. Thanks for the tip about Stahl's, Pierre, I looked at TE and didn't think to check the parent company.

Steve