TSB

screen printing => Equipment => Topic started by: Rockers on April 12, 2020, 09:25:45 PM

Title: Roq auto pricing
Post by: Rockers on April 12, 2020, 09:25:45 PM: We are in the market for anew automatic 12/10 press. Looking at different suppliers. M&R, Adelco, MHM and Roq.

Looking at the Roq website I don`t seem to be able to make out which are their "entry level presses" and which one3 are the higher priced ones?
And as I cannot get a reply of them right now maybe someone here could let me klnp0w how much ,approx., their 12/10 presses are. Just a ballpark figure will do.

Thanks
Title: Re: Roq auto pricing
Post by: brandon on April 12, 2020, 10:53:48 PM: Hey you tried Mike on here? He's their rep for NZ and Australia as well I believe. Not near you but still a lot closer than the States or Portugal. If you want his email let me know.
Title: Re: Roq auto pricing
Post by: brandon on April 12, 2020, 11:18:25 PM: Hey just set you up. Check your email
Title: Re: Roq auto pricing
Post by: Rockers on April 13, 2020, 03:44:04 AM: Quote from: brandon on April 12, 2020, 11:18:25 PM
Hey just set you up. Check your email
Thanks Brandon, he just emailed me.
Title: Re: Roq auto pricing
Post by: TCT on April 13, 2020, 10:17:31 AM: YOU-> NEXT-> ECO
Title: Re: Roq auto pricing
Post by: michal on April 15, 2020, 04:18:18 AM: My proposition for you is Anatol press. If you are interesting please write me message on miwaniuk@spe.home.pl
Title: Re: Roq auto pricing
Post by: Rockers on April 15, 2020, 08:09:53 PM: Quote from: michal on April 15, 2020, 04:18:18 AM
My proposition for you is Anatol press. If you are interesting please write me message on miwaniuk@spe.home.pl
Sorry but no side clamps press for us anylonger
Title: Re: Roq auto pricing
Post by: numbercruncher on April 16, 2020, 06:12:49 PM: When I used to work for Anatol they offered an option and manufactured ( I sold a few) presses with front and rear clamps for those that had a shop used to that configuration. Just FYI.
Title: Re: Roq auto pricing
Post by: Maxie on April 17, 2020, 12:09:05 AM: If you want a reliable, accurate press that will give you years of output look at the MHM S Type.
I've had one for 4.5 years and love it.
Title: Re: Roq auto pricing
Post by: DannyGruninger on April 17, 2020, 10:30:48 AM: The roq next and roq eco are two of the absolute best machines out there. I'd put them against anything in terms of reliability, performance, and value. In 4 years we have done several million prints on our roqs with little to no issues. They just run and run and run.