TSB
Direct to Garment => DTG - General => Topic started by: Mr Tees!! on November 10, 2020, 12:40:17 PM
-
...anyone have one of these machines yet, and experiencing this? We've had our installed barely a month and we have had serious issues keeping the white aligned to the color. At this point we can align and its out again within two or so shirts.
-
What does Brother say?
-
We haven't had any issues with it falling out of alignment, but certain jobs we are choking all the way up to like 4-5 to keep the base from peaking out. We normally choke at 3 and that generally works pretty well. If we are printing on a lighter colored garment we might bring it back to 2 if the outline is bad.
Are you sure the machine is actually losing alignment? Is the machine level and stationary?
-
could it be the shirt stretching? Can you post some pictures?
pierre
-
White ink shrinks towards the middle of the print as it dries. So one pass print is going to be your friend. Also we use 5 or 6 choke for most designs to help cover peeking unless the logo is really intricate in detail.