TSB
screen printing => Equipment => Topic started by: darkbosque_ on August 20, 2021, 09:56:11 AM
-
Hey Yall
Im looking to get a reclaim filtration system. Im not really sure how much filtration we need, we reclaim about 50 screens a day.
I was looking into https://www.screenprinting.com/products/sgreen-washout-booth-filtration-system?variant=5214226939945 (https://www.screenprinting.com/products/sgreen-washout-booth-filtration-system?variant=5214226939945)
and https://www.gogsg.com/2327561/Product/Easiway_Systems_ (https://www.gogsg.com/2327561/Product/Easiway_Systems_)$itemData.manufacturerPartNumber
I know that the first one will for sure gets the job done but I was working at a shop that we only had that Easiway EDF Drain Filtration Unit that seemed to work great especially paired with the lotus 3 staged Reclaim, Im just not sure if that would be enough filtration to go out to the city sewage with just the normal elbow grease reclaiming?
-
dunno anything about the gsg model, but we are using the first one and it works great, but ONLY if you set it up with sediment tanks before it. On its own it clogs up too fast.
We have two 55 gallon drums (with baffles) that the water goes through first so most of the sludge stays in the drums. By the time it gets to the filtration unit its pretty clean.
if you look around you'll find the video Ryonet shot in our shop with Matt (our production manager who built it) explaining how it works.
pierre
-
My system is based on Pierre’s. At the end I have a box with a pump that has a float that starts the pump when the box is full. I pump through a filter into the drain. For cleaner water you can have more than one filter.
-
Thanks For the Help Yall