TSB
screen printing => Equipment => Topic started by: inkman996 on January 21, 2022, 10:47:13 AM
-
See pics below, I have a Hotronix 16 x 20 auto open that we are selling. Want it gone ASAP but when we bought it I had it wired for 240 because there was an existing 240 outlet where it was going to live. Now I need to know can I rewire it to 120? Since it is being sold I want to make sure it is done correctly, I get a little confused when there is no neutral involved.
-
Hmmm, from what I'm thinking you could wire it for 110 but it might only get half the power it needs to work since it was built for 220, so I'm saying no because it has some components that need to have 220 for it's full power, but I could be wrong.
-
honestly i would call and ask hotronics as they would have the best answer
-
call Stahls. . .
you would need to have a transformer inside that has output at both 220 and 110. That's pretty common so it's possible that the one in there would support both voltages. Ultimately, Stahls should be able to help.
pierre
-
See pics below, I have a Hotronix 16 x 20 auto open that we are selling. Want it gone ASAP but when we bought it I had it wired for 240 because there was an existing 240 outlet where it was going to live. Now I need to know can I rewire it to 120? Since it is being sold I want to make sure it is done correctly, I get a little confused when there is no neutral involved.
Looks like the press has a 10amp push button circuit breaker, which would only be suitable for 240 volt operation.
-
There are some parts you need, we had ours wired from 240 to 120, it was about 8 years ago so I don't remember. I bet stahls sells a kit for it.
-
we have two parts presses. If you let me know what you need I can pull out and ship to you.
pierre