TSB
screen printing => General Screen Printing => Topic started by: Logoman on April 21, 2022, 05:23:34 PM
-
If you pull the print apart is it always under cured if the ink cracks?
-
If you pull the print apart is it always under cured if the ink cracks?
Plastisol, right? Depending on how hard you pull, yes, usually. When it's cured and fused together, it should act like a thin film of plastic that has a little give.
-
Depending on how hard you pull
Pull hard enough and it will surly crack/split. Wish I could give something to reference by.
Wash test will give a definite answer.
-
Here’s a YouTube visual from Lawson, showing a stretch test
https://www.youtube.com/watch?v=GmDjRnrO-Jw (https://www.youtube.com/watch?v=GmDjRnrO-Jw)[/url]
-
Thinner deposits will always crack (my opinion) if stretched enough.
-
I know this is a smart azz remark to say, but who's going to go around pulling on the print of there shirts ;D
-
I know this is a smart azz remark to say, but who's going to go around pulling on the print of there shirts ;D
Printers who are unsure of the ink being fully cured!
-
I know this is a smart azz remark to say, but who's going to go around pulling on the print of there shirts ;D
I do it when I'm out at the mall, it's surprising how many times I've come across under cured prints.
-
I know this is a smart azz remark to say, but who's going to go around pulling on the print of there shirts ;D
I do it when I'm out at the mall, it's surprising how many times I've come across under cured prints.
Let me add that I forgot to say what customer will be pulling on a print, unless they have an inside track LOL