TSB
screen printing => Equipment => Topic started by: cclaud3 on November 15, 2023, 04:02:37 PM
-
Hello, i'm looking for a measurement on a 72" wide Sprint 3000. The height from bottom of the out-feed belt roller to the floor. Patriot belt system.
Ours is in a crate and seeing 27.1875". I know the leveling feet may effect it.
Is anyone able to verify with their machine?
We have another machine that needs to work off this height and won't be able to install it for a bit. thanks
Called M&R and can't get through.
-
Hello, i'm looking for a measurement on a 72" wide Sprint 3000. The height from bottom of the out-feed belt roller to the floor. Patriot belt system.
Ours is in a crate and seeing 27.1875". I know the leveling feet may effect it.
Is anyone able to verify with their machine?
We have another machine that needs to work off this height and won't be able to install it for a bit. thanks
Called M&R and can't get through.
Literally just installed one. From the lowest point of the belt roller to the floor, you should have a range of approx 25.75" to 29" (give or take). Your overall floor level may affect this over the span of the dryer length.
-
Thank you!