TSB
screen printing => Screen Making => Topic started by: Admiral on September 24, 2024, 11:38:33 AM
-
Anyone have an alternate source for these black needle filters?
https://www.mrprint.com/store/product/7990002/black-needle-filter-b-c (https://www.mrprint.com/store/product/7990002/black-needle-filter-b-c)
My order has been on backorder for 3 weeks and I was just told 2 more months on it. That's after 5 phone calls and waiting to be called back an hour + and finally getting in touch. Their service has gone way down hill. I miss Rich Hoffman.
-
You can try and see if there is a comparable one on here.
https://www.digiprint-supplies.com/en/filters (https://www.digiprint-supplies.com/en/filters)
Here is a one that might work, but do your diligence to make sure.
https://www.digiprint-supplies.com/en/digibase-small-capsule-filter-black-5-micron-hose-barb-8131-0500-ll-c (https://www.digiprint-supplies.com/en/digibase-small-capsule-filter-black-5-micron-hose-barb-8131-0500-ll-c)
-
You can try and see if there is a comparable one on here.
https://www.digiprint-supplies.com/en/filters (https://www.digiprint-supplies.com/en/filters)
Here is a one that might work, but do your diligence to make sure.
https://www.digiprint-supplies.com/en/digibase-small-capsule-filter-black-5-micron-hose-barb-8131-0500-ll-c (https://www.digiprint-supplies.com/en/digibase-small-capsule-filter-black-5-micron-hose-barb-8131-0500-ll-c)
Thanks for the suggestion, I may look further into it but may just wait until November too...I thought I could save $100 bucks getting this from the source.
Closest I could find was this but I would have to reach out to check the full part number:
https://www.digitalprintsupplies.com/products/black-needle-filter-1 (https://www.digitalprintsupplies.com/products/black-needle-filter-1)
-
This is a close up of what I got when I ordered that part number. You probably can’t see it but on the left the brand is “cobetter”
The top numbers and letters are Phpii b-inkpp0500ec
The bottom is 3en1811021
Maybe with that info you can find it elsewhere
-
This is a close up of what I got when I ordered that part number. You probably can’t see it but on the left the brand is “cobetter”
The top numbers and letters are Phpii b-inkpp0500ec
The bottom is 3en1811021
Maybe with that info you can find it elsewhere
Thanks! I ordered 2x of those, we will see if I do in fact get them in 1.5 weeks.
I probably could have opened up the CTS to see them as well...Anyway, this was more of a gripe with M&R haha.
-
Yeah I ran into the same issue on the caps for the capping station. They were back ordered for a couple of months