TSB

screen printing => General Screen Printing => Topic started by: Prosperi-Tees on April 06, 2012, 12:32:45 AM

Title: Discharge or Plastisol
Post by: Prosperi-Tees on April 06, 2012, 12:32:45 AM

I am going to print these shirts next week. What I am debating is the gray in the image. I want it to be more background than on top if that makes sense. I am wondering would you do a dark gray discharge or a 80/20 curable reducer and plastisol?

Title: Re: Discharge or Plastisol
Post by: brandon on April 06, 2012, 12:46:00 AM

Gray discharge on charcoal/asphalt t's? Just do gray waterbase. Or gray plastisol one stroke high tension / mesh. That gray dcharge on that color garment could give you undesirable results. I would recommend test prints

Title: Re: Discharge or Plastisol
Post by: Prosperi-Tees on April 06, 2012, 12:59:03 AM

Actually it will be on black Ts. What mesh? I was thinking 230.

Title: Re: Discharge or Plastisol
Post by: JBLUE on April 06, 2012, 09:39:53 AM

230-305 is what I would use. Base out the gray and run it. Either way waterbase or based out plastisol will work just fine.