TSB

screen printing => Equipment => Topic started by: inkman996 on April 10, 2012, 11:26:52 AM

Title: Need a measurement
Post by: inkman996 on April 10, 2012, 11:26:52 AM

We bought the triloc and MSP3140 from M&R they will be arriving this week, meanwhile I have no notches in my front screen hangers for the palette attachment. Can someone provide me with an exact measurement from the center of the attachment to the first edge of the stop block then the actual width of the stop vlock. I want to get started on cutting these hangers before the equipment arrives. Attached below is a graphic of what I need. TIA

Title: Re: Need a measurement
Post by: Mr Tees!! on April 10, 2012, 11:50:23 AM

...I measured 8.75" from the centerline on the triloc pallet, to the first edge or the stopblock. The stopblock measures 1-1/8" wide.

Title: Re: Need a measurement
Post by: inkman996 on April 10, 2012, 12:34:29 PM

Thanks everyone for the help Sam called with the measurements, now I can get to cutting.