TSB
screen printing => General Screen Printing => Topic started by: screenxpress on April 10, 2012, 09:11:32 PM
-
I think this is really too easy though.
-
Home made ink mixing bit for a drill
-
it's an old school sardine can opener!
like this:
pierre
-
It's for unlocking a bathroom door
-
I didn't see it the first time. It's a double barrel lightsavor.
-
Ya, I knew it was too easy.
I guess I could try to use it to open a can of sardines.
But Gear had it nailed. It's a simply a cut and bent piece of welding rod for ink mixing.
I refuse to go through the cleanup required from one of the $3 paint stirrers. Yes, they are cheap enough, but ink gets into all the nooks and crannies making it almost impossible to move from color to color.
I tried using a bent coat hanger and although it worked pretty well, a quart of Maxopake that had sat for a couple of years did take it's toll, but did stir.
So I stopped by the welding supply and got a couple of uncoated rods ($1 each) I can quickly cut and bend to the diamond shape you see. It's easy to wipe clean for reuse, or run through the dryer and dispose. I figure I can get about 4 (for quarts) per rod.
;)
-
Nawh, I saw it on a TV show tonight. Body of Evidence. This serial killer guy used that to pull people's brains out through the nose like the egyptians did in the mummification process.
-
OMG, ROFLMAO!!!!
Good one Dan
-
have to do with abortion? hey -you know you guys were thinking it to -I'm just the jerk to say it.
-
It's a painters church key/paint can opener.
-
have to do with abortion? hey -you know you guys were thinking it to -I'm just the jerk to say it.
It's the abortion tool that brings out the kid in you.
-
Homer beat you to the punch on that one.....lol